The D-08u is a CD/SACD player from Luxman of Japan that also operates as a USB D/A converter. Luxman introduced it as its new flagship disc player, and the later D-10X builds on it. Its disc drive is the company's own LxDTM (LuXman original Disc Transport Mechanism), and the analogue output stage uses ODNF (Only Distortion Negative Feedback) version 4.0.
Key specs that matter
Applicable discs are 2-channel SACD and CD. The USB input accepts PCM at 32 - 384 kHz (16, 24 and 32 bit) and DSD at 2.82 and 5.64 MHz (1 bit), while the coaxial and two optical inputs accept 32 - 192 kHz (16, 20 and 24 bit). D/A conversion uses two Burr-Brown PCM1792A chips in monaural mode. Analogue output is 2.5 V, with 300 ohms output impedance unbalanced and 600 ohms balanced. Frequency response is 5 Hz - 20 kHz (+0/-0.5 dB) for CD and 2 Hz - 50 kHz (+0/-3.0 dB) for USB. THD is 0.0015% for CD, 0.0011% for SACD and 0.0009% for USB, and S/N ratio (IHF-A) is 123 dB for CD, 106 dB for SACD and 123 dB for USB. Power consumption is 36 W (1 W in standby). The chassis measures 440 x 154 x 413 mm (W x H x D) and weighs 22.5 kg.
Engineering and use context
LxDTM is a rigid in-house design with a dust-proof shutter, placed on the left side to leave room for the analogue circuitry and keep the signal path short. A case covers the base under the transport, and a thick square chassis reduces external vibration. Gradation cast-iron feet have a cast-in density gradient.
Luxman quotes a theoretical dynamic range of 132 dB for the dual PCM1792A configuration. Texas Instruments TAS-3152 32-bit DSP chips perform PCM upsampling up to 384 kHz and offer three digital filters for PCM and DSD, and the DAC chip adds two analogue FIR filters. Against jitter, the USB input runs in asynchronous mode with a dedicated DSP engine, CD and S/PDIF paths have DAIR clocks, SACD data passes through a dedicated jitter reduction chip, and a low phase noise clock module is also used.
Its ODNF 4.0 output circuit is fully balanced and discrete, and the out-of-band filtering is done inside the ODNF circuit by three first-order filters instead of a separate filter stage. Each circuit has an independent regulator and large blocking capacitors, supplied by a power transformer designed for audio use. All audio boards use peel coat PCBs. RCA outputs are made of a copper and brass alloy, and the balanced outputs use Neutrik XLR connectors. An RD-21 aluminium remote control and the LUXMAN Audio Player software are supplied.
Pairing
The balanced XLR and unbalanced RCA outputs connect to any line-level input. A Windows PC requires the Luxman USB driver.
Alternatives
The D-10X is Luxman's later SACD/CD player, with two ROHM BD34301EKV converters.