The SCS120 Pro is a free-standing active subwoofer from ATC, part of the SCS (Studio Control Subwoofer) series that partners the company's professional active monitors. ATC launched it in November 2025 together with the in-wall SCS120iW Pro, at a UK price of GBP 4,575 plus VAT. It is intended for mid-sized and larger studios and for stereo, surround and object-based formats such as Dolby Atmos.
Key specs that matter
Drive unit is 1 x ATC SS75-375SC 375 mm, 8 ohms. Low frequency cut-off is 20 Hz (-6 dB, half space, low-pass filter set at 80 Hz). Max SPL is 113 dB continuous and 119 dB peak (IEC weighted pink noise, 1 m, half space). Sensitivity is 85 dBC, ref. -17 dBu. Its amplifier delivers 300 W into 8 ohms with THD+N below 0.003% (-90 dB) at 100 Hz. Electronic frequency response is <2 Hz (-3 dB) - 320 Hz (-6 dB). Input sensitivity is 1.12 Vrms for full power, input impedance approx. 20 kohms (differential) and input CMRR 90 dB at 200 Hz. Dimensions are 638 x 498 x 568 mm (H x W x D), with the heatsink protruding a further 40 mm at the rear, and net weight is 44.5 kg.
Engineering and use context
ATC uses a 120-litre sealed cabinet. The SS75-375SC is a hand-built high-excursion sub-bass driver with a short voice coil operating in a long magnetic gap. Behind it sits a discrete amplifier with grounded source MOSFETs in class A-B, convection cooled and mounted on the rear of the cabinet.
Low-pass filters are 4th-order Linkwitz Riley at 50, 65 and 80 Hz. A fourth position (320 Hz) switches the filter off for external processing. Gain is set to 0, +6 or +10 dB, and the level control covers 0 to -11 dB in 1 dB steps, a total range of 21 dB. According to ATC, the +10 dB setting is for formats that calibrate the LFE channel 10 dB higher than the LCR channels. Phase is continuously variable from 0 to 180 degrees, with a separate polarity switch. An ATC Active FET momentary gain reduction limiter is indicated on the front panel, and DC offset and over-temperature protection on the rear. Each unit is hand-built in England and covered by a 6-year warranty.
Pairing
Inputs are two female XLR (pin 2 hot), and two buffered unfiltered balanced XLR outputs pass the signal on to the main monitors. ATC lists the SCM45A, SCM50A, SCM100A, SCM110A, SCM150A, SCM200A and SCM300A Pro as partner monitors. A latching footswitch with a 6.35 mm jack, supplied separately, is required for remote muting.
Alternatives
The ATC SCS70 Pro is the smaller free-standing model, with one 314 mm SS75-314SC driver in a 70-litre sealed cabinet.