Hifiverse

Subwoofer - ATC C6 Sub

Beschreibung, Bilder, technische Daten und Spezifikationen

ATC C6 Sub
Bildquelle - (c) ATC

The C6 Sub is the 375 mm active subwoofer in the domestic range of ATC, the English maker of studio monitors, for two-channel and surround systems. It combines a full SL specification bass driver with an integral Class G amplifier and comes with a 6-year warranty. The cabinet can be finished in any veneer to order, with yew shown as the featured option.

Key specs that matter

Amplifier output is 450 W, with a dynamic output of 1000 W. Amplitude linearity is 30 Hz - 300 Hz (±2 dB), and the cut-off frequency is 20 Hz (-6 dB, free-standing). Maximum continuous SPL is 115 dB at 1 m. Inputs are male XLR connectors with 1 V sensitivity and a balanced impedance above 10 kohms. Each unit measures 624 x 580 x 580 mm (H x W x D) and weighs 60 kg.

Engineering and use context

SL stands for Super Linear, the ATC drive unit technology aimed at magnetic hysteresis, named by the company as a significant source of distortion in drive units. Low pass filters are 2nd order, critically damped, and overload protection is by active FET momentary gain reduction. Controls cover phase adjustment, variable cut-off frequency and variable gain, and a power on indicator sits on the panel. With stereo inputs in use, ATC's subwoofer manual states that the left and right signals are summed by the amplifier, raising the effective sensitivity by 6 dB, and a mono subwoofer signal from an AV processor can go to either XLR input.

Earlier versions of the C6 Sub used a different electronics package. Their amplifier was rated at 650 W, with second order critically damped low pass settings at 50, 60, 70, 80 and 90 Hz, a gain range of ±6 dB and a contour equaliser giving +6 dB at 40 - 60 Hz. A badge on the lower front of that cabinet carries a green and red amplifier status indicator. Those units are specified at 18 Hz and 250 Hz (-3 dB, free-standing), measure 635 x 550 x 550 mm and weigh 63.6 kg.

Pairing

A preamplifier or AV processor with balanced outputs is required, and a single-ended source needs an RCA to XLR cable. The stereo inputs accept the left and right outputs of a two-channel preamplifier.

Alternatives

The ATC C4 Sub Mk2 is the smaller model, with a 314 mm SS75-314SC driver and a 300 W Class A-B MOSFET amplifier.

Spezifikationen

  • Modellbezeichnung

    C6 Sub

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20 (-6dB)

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    450

  • Größe (sm)

    62.4 x 58.0 x 58.0

  • Gewicht (kg)

    60

  • Offizieller Link