Hifiverse

Subwoofer - Klipsch RP-1600SW

Beschreibung, Bilder, technische Daten und Spezifikationen

Klipsch RP-1600SW
Bildquelle - (c) Klipsch

The RP-1600SW is the largest of the four powered subwoofers in the Reference Premiere range from Klipsch, the loudspeaker maker based in Indianapolis. Below it sit the RP-1000SW, RP-1200SW and RP-1400SW, and the RP-1600SW carries a 5-year warranty.

Key specs that matter

Frequency response is 14.5 Hz - 175 Hz (±3 dB), with maximum acoustic output of 125.5 dB. Amplifier type is Class D with an analog preamp stage, and amplifier power is 800 W RMS and 1600 W peak. A 406 mm (16 in.) Ultra Long Throw Cerametallic woofer with a spun copper finish is used. Enclosure material is MDF. Bass reflex loading is via a front-firing Aerofoil slot port. Inputs are dual RCA/LFE line in plus a WA-2 wireless port. Dimensions are 594 x 597 x 695 mm (H x W x D), weight is 50.3 kg, and ebony vinyl is the only finish.

Engineering and use context

Klipsch quotes its newly designed Cerametallic woofers as light and rigid, giving minimal cone breakup and distortion and higher output with less amplifier power. The Aerofoil slot port uses a proprietary internal geometry with an internal flare to minimise port noise. Across the range, Klipsch aims for a balance between amplifier power, driver capability and cabinet volume.

Inside the built-in amplifier, an analog preamp design maintains the original signal path, and the Class D output stage follows it. Its panel carries a low-pass crossover control that reaches 160 Hz at the top of its travel, a variable phase control and an AUTO/ON/OFF switch. With the switch on auto, the RP-1600SW turns on when it senses a signal and drops into standby after 15-20 minutes of silence. Standby consumption is 0.5 W. On the front baffle, a power LED lights green while the amplifier is on and receiving a signal. Both the RCA and the wireless inputs stay active at the same time - the wireless input with a home theatre system and RCA with a two-channel system, without switching inputs.

Ebony vinyl, scratch-resistant, covers the whole cabinet. Corners are rounded, the feet are shock-absorbing rubber, and the woven cloth grille is held on steel grille posts.

Pairing

An AV receiver, processor or preamplifier with an LFE or subwoofer output is required. Left and right pre-amp outputs can also be connected to the L/LFE and R line inputs. The optional WA-2 Wireless Subwoofer Kit transmits at 2.4 GHz over about 15 m, with up to four kits per room.

Alternatives

The RP-1400SW is the next Reference Premiere subwoofer down, with a 356 mm (14 in.) Cerametallic woofer and 500 W RMS of amplification.

Spezifikationen

  • Modellbezeichnung

    RP-1600SW

  • Untere Grenzfrequenz +/- 3dB (Hz)

    14.5

  • Obere Grenzfrequenz +/- 3dB (Hz)

    175

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    800 - 1600

  • Größe (sm)

    59.4 × 59.7 × 69.5

  • Gewicht (kg)

    50.3

  • Offizieller Link