The RP-1400SW is a powered subwoofer from Klipsch of Indianapolis and the second-largest of the four models in the Reference Premiere subwoofer range. Below it sit the RP-1000SW and RP-1200SW, and above it is the RP-1600SW. Klipsch covers the RP-1400SW with a 5-year warranty.
Key specs that matter
Frequency response is 16 Hz - 141 Hz (±3 dB), and maximum acoustic output is 124 dB. The amplifier is Class D with an analog preamp stage, rated at 500 W RMS and 1000 W peak. Its woofer is a 356 mm (14 in.) Ultra Long Throw Cerametallic unit with a spun copper finish. Enclosure material is MDF, and the enclosure type is bass reflex via a front-firing Aerofoil slot port. Inputs are dual RCA/LFE line in and a WA-2 wireless port. Dimensions are 542 x 508 x 652 mm (H x W x D), weight is 38.0 kg, and the finish is ebony vinyl.
Engineering and use context
Klipsch describes the newly designed Cerametallic woofers as light and rigid, with minimal cone breakup and distortion, for higher output from less amplifier power. Behind the Aerofoil slot port is a proprietary internal geometry with an internal flare that reduces port noise. According to Klipsch, every Reference Premiere subwoofer is designed for a balance between amplifier power, driver capability and cabinet volume.
In the amplifier, the analog preamp section maintains the original signal path ahead of the Class D output stage. Controls are a low-pass crossover with a top setting of 160 Hz, a phase control and an AUTO/ON/OFF power switch. In the auto position the subwoofer turns on when it senses a signal and goes into standby after 15-20 minutes without one, drawing 0.5 W. A power LED on the front baffle lights green when the amplifier is on and receiving a signal. RCA and wireless inputs can be used simultaneously - the wireless input with a home theatre system and RCA with a two-channel system, without input switching.
Scratch-resistant ebony vinyl covers the entire cabinet. It has rounded corners and shock-absorbing rubber feet, and the woven cloth grille sits on steel grille posts.
Pairing
A receiver, processor or preamplifier with an LFE or subwoofer output is required. The L/LFE and R line inputs also accept left and right pre-amp outputs. Klipsch sells the WA-2 Wireless Subwoofer Kit separately. It uses a 2.4 GHz link with a range of about 15 m, and up to four WA-2 kits can run in one room.
Alternatives
The RP-1600SW is the larger Reference Premiere subwoofer, with a 406 mm (16 in.) Cerametallic woofer and 800 W RMS of amplification.