Hifiverse

Subwoofer - Klipsch R-101SW

Beschreibung, Bilder, technische Daten und Spezifikationen

Klipsch R-101SW
Bildquelle - (c) Klipsch

The R-101SW is a powered subwoofer from the current generation of the Klipsch Reference series, released in 2021 as the successor to the R-100SW. It is the 254 mm woofer model of the range and shares its owner's manual with the larger R-121SW. Against the earlier generation it has a new woofer cone material, reinforced cabinet walls and a new bracing design. The only finish is black textured wood grain vinyl.

Key specs that matter

Its front-firing 254 mm high-excursion woofer has a spun-copper Thermoformed Crystalline Polymer (TCP) cone. The built-in amplifier is all-digital, with 150 W continuous and 300 W peak power. Frequency range is 29.5 - 120 Hz, and maximum acoustic output is 115 dB. Bass loading is reflex, via a rear-firing port. Line level/LFE RCA jacks are the inputs. Dimensions are 370 x 356 x 500 mm (H x W x D), and weight is 13.9 kg.

Engineering and use context

Klipsch describes TCP woofers as light, rigid and tightly packed, with minimal cone breakup and distortion and no degradation of the material. The cabinet is reinforced 19 mm MDF with an all-new bracing design that reduces cabinet vibration. A scratch-resistant vinyl covers the enclosure.

Controls cover volume, a variable low-pass filter up to 160 Hz, a 0/180 degree phase switch and Auto Power On. With the power switch in Auto, the subwoofer turns on when it senses a signal and switches to standby after 15 - 20 minutes without one. The On position keeps it running, and Off keeps it switched off until the switch is moved. On the front baffle a power LED shows the amplifier status - green with the amplifier on and a signal present, unlit with the amplifier off. A low-profile grille covers the woofer, and Klipsch calls it acoustically transparent.

Two RCA line inputs are provided, labelled LEFT/LFE and R. A single cable from the subwoofer output of a surround receiver or processor connects to LEFT/LFE. In a system without a subwoofer output, the left and right pre-amp outputs of a receiver connect to both inputs. Klipsch states that the Reference subwoofers work with home theater receivers of any make and model.

Pairing

A receiver, processor or preamplifier with a line-level subwoofer output or left and right pre-outs is required. The low-pass and phase controls are intended for blending with other Klipsch speakers. When the receiver sets the crossover point, the subwoofer's low-pass knob is set to 160 Hz.

Alternatives

The R-121SW is the larger subwoofer of the same Reference generation, with a 305 mm spun-copper TCP woofer, 200 W continuous power and a 28 - 120 Hz frequency range.

Spezifikationen

  • Modellbezeichnung

    R-101SW

  • Untere Grenzfrequenz +/- 3dB (Hz)

    29.5

  • Obere Grenzfrequenz +/- 3dB (Hz)

    120

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Endverstärker (W)

    150 - 300

  • Größe (sm)

    37.0 × 35.6 × 50.0

  • Gewicht (kg)

    13.9

  • Offizieller Link