Hifiverse

Subwoofer - B&W (Bowers & Wilkins) DB2D

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) DB2D
Bildquelle - (c) B&W (Bowers & Wilkins)

The DB2D is a powered subwoofer in the Bowers & Wilkins DB Series for music and film systems, and Bowers & Wilkins states that it complements the 800 Series Diamond loudspeakers. Bowers & Wilkins equips it with a digital amplifier, a digital preamplifier and app-based set-up with control over Bluetooth Low Energy (BT-LE).

Key specs that matter

Drive units are 2 x 250 mm (10 in) Aerofoil cone in a balanced configuration. Frequency response is 10 Hz - 350 Hz (-3 dB, referred to the level at 100 Hz), and frequency range is 8.5 Hz - 500 Hz (-6 dB). Inputs are 2 x XLR and 2 x RCA, with 2 x 3.5 mm 12 V trigger and an RS-232 port on a 9-pin D connector. The cabinet measures 430 x 377 x 360 mm (H x W x D) and weighs 36 kg net. Finishes are gloss black and satin white, with a black or grey grille.

Engineering and use context

Both drive units are mounted back-to-back, and according to Bowers & Wilkins this opposed arrangement cancels out cabinet resonances. Each uniquely shaped Aerofoil cone has a variable thickness for rigidity and low mass, and the same 10-inch drivers are used in the 800 D4 loudspeakers.

Bowers & Wilkins describes the high-efficiency digital amplifier as cool-running and energy efficient. Ahead of it, the digital preamplifier applies Dynamic EQ. Alongside the app, the subwoofer can be switched on by a 12 V trigger signal and controlled over RS-232.

Pairing

A preamplifier, AV processor or AV receiver with an RCA or XLR subwoofer output is required. The XLR and RCA inputs accept a stereo pair of subwoofer outputs. App set-up requires a phone or tablet with Bluetooth Low Energy. A 12 V trigger output on the processor allows automatic switch-on, and the RS-232 port allows integration with a control system.

Alternatives

The DB1D is another subwoofer in the Bowers & Wilkins DB Series.

Spezifikationen