Hifiverse

Subwoofer - B&W (Bowers & Wilkins) DB4S

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) DB4S
Bildquelle - (c) B&W (Bowers & Wilkins)

The DB4S is an active closed-box subwoofer from Bowers & Wilkins with a single 10-inch Aerofoil cone and 1000 W of digital amplification. It is the most compact model of the DB Series and, according to Bowers & Wilkins, a perfect match for the 700 Series loudspeakers. List price is GBP 1,950 in the UK and USD 2,900 in the US.

Key specs that matter

Drive unit is 1 x 250 mm (10 in) Aerofoil cone bass. Frequency response is 10 Hz - 350 Hz (-3 dB, centred on level at 100 Hz), and frequency range is 8.5 Hz - 500 Hz (-6 dB). Signal-to-noise ratio is 82 dB. Inputs are 2 x XLR (20 kOhm) and 2 x RCA (10 kOhm), plus 2 x 3.5 mm 12 V trigger and an RS-232 9-pin D connector. Power consumption is 195 W at 1/8th of rated power and below 0.5 W in standby. Height is 377 mm including feet, width 360 mm and depth 368 mm, and net weight is 26 kg.

Engineering and use context

Its Aerofoil cone has a uniquely shaped, variable-thickness profile. Ahead of the amplifier the DB4S uses a digital preamplifier with Dynamic EQ. Set-up is app-based, with Bluetooth LE control, and calibration and correction are adjusted in the dedicated smartphone app.

In the app the input connection is set to Stereo or LFE, the latter for the low-frequency effects channel of a home theatre system. Input EQ presets are Flat, Music, Movie and Custom, and the Custom setting opens a five-band EQ page. Input trim starts at 0 dB and is changed only when the level control on the app home page does not give a suitable range. Spike, decoupling and rubber feet are included, the rubber feet being intended for solid floors without carpet. Cabinet finishes are Gloss Black and Rosenut, both with a black grille, and Satin White with a grey grille.

Pairing

A stereo preamplifier connects to the balanced or unbalanced inputs in Stereo mode, and the subwoofer output of an AV receiver or processor in LFE mode. With an LFE connection, Bowers & Wilkins advises using the bass management of the source equipment. The 12 V trigger inputs allow switch-on together with an AV processor or system controller.

Alternatives

The DB3D is the next model up in the Bowers & Wilkins DB Series, with twin 8-inch drive units.

Spezifikationen