Hifiverse

Subwoofer - B&W (Bowers & Wilkins) DB1D

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) DB1D
Bildquelle - (c) B&W (Bowers & Wilkins)

The DB1D is the top model of the DB Series of active subwoofers from Bowers & Wilkins. Bowers & Wilkins announced the series in February 2017 with the DB1D, DB2D and DB3D and described them as the most powerful active subwoofers it had produced. The DB1D became available in May 2017 at USD 4,500, or GBP 4,150 in the UK, and the current US price is USD 7,200.

Key specs that matter

Two 300 mm Aerofoil cone drive units are mounted in a balanced configuration and driven by a 2000 W digital amplifier. Frequency response is 10 Hz - 350 Hz (-3 dB, referenced to the level at 100 Hz), and frequency range is 8.5 Hz - 500 Hz (-6 dB). Inputs are 2 x XLR, 2 x RCA, 2 x 3.5 mm 12 V trigger and RS-232 on a 9-pin D connector. Dimensions are 460 x 429 x 410 mm (H x W x D), and net weight is 43 kg. Cabinet finishes are Gloss Black, Satin White and Rosenut, with Black or Grey grilles.

Engineering and use context

Both drivers face sideways and are mounted back-to-back. Bowers & Wilkins states that the opposed drivers cancel out cabinet resonances. Their variable-thickness Aerofoil cones are identical to those of the 800 Series Diamond loudspeakers. The enclosure is rigid and highly damped. Its digital amplification is cool-running and energy efficient, with the heat sink on the underside of the cabinet.

A digital preamplifier provides Dynamic EQ. Set-up and control are possible only through the DB Subwoofers app for iOS and Android over Bluetooth Low Energy. XLR and RCA inputs can be connected at the same time and are configured independently, each as None, Stereo or LFE and with its own trim. Input EQ choices are Flat, Music, Movie and Custom, the last a five-band equaliser. In Stereo mode the low-pass filter is set for a specific Bowers & Wilkins speaker model or as a custom filter.

On the rear panel, Trigger 1 controls power-on and standby, Trigger 2 controls input selection, and the RS-232 port links the subwoofer to home automation systems. After 20 minutes without use the DB1D switches to standby, and a standby button is on the front panel. Supplied feet are spikes for carpet, decoupling feet for suspended wooden floors and rubber feet for hard floors. Cloth grilles attach magnetically.

Pairing

The XLR and RCA inputs accept a stereo preamplifier output or the LFE output of an AV processor. In LFE mode bass management is set in the processor. Both input pairs allow a stereo system and a home cinema to share one subwoofer.

Alternatives

The Bowers & Wilkins DB2D is the middle model of the DB Series, with a 1000 W amplifier.

Spezifikationen