Hifiverse

Subwoofer - B&W (Bowers & Wilkins) ASW610XP

Beschreibung, Bilder, technische Daten und Spezifikationen

B&W (Bowers & Wilkins) ASW610XP
Bildquelle - (c) B&W (Bowers & Wilkins)

The ASW610XP is the most powerful of the three ASW Series subwoofers from Bowers & Wilkins, above the ASW608 and ASW610. It keeps the 250 mm driver size of the ASW610 but has a larger cabinet, a 500 W amplifier and a cone of different composition. An active closed-box design, it was priced at USD 2,000 and shares an owner's manual dated May 2013 with the other two models.

Key specs that matter

The drive unit is a 250 mm long-throw type with a cone of paper pulp, Aramid fibre and resin. Amplification is a 500 W (rated power) ICEpower Class D amplifier. Frequency response is 25 Hz - 40/140 Hz adjustable (±3 dB, EQ at A). Bass extension is -6 dB at 18 Hz in position A, 23 Hz in position B and 28 Hz in position C. Power consumption is 98 W, 1 W in standby. Input impedance is 33 kohms and signal/noise is >80 dB. Height is 325 mm without feet or spikes (337 mm on feet, 353 mm on spikes), width is 325 mm and depth is 348 mm (375 mm with grille and controls). Net weight is 18.65 kg.

Engineering and use context

According to Bowers & Wilkins, the paper pulp, Aramid fibre and resin mix gives the cone its stiffness. The amplifier is designed for cool operation. Connections are a line input on RCA sockets, speaker-level binding posts and a 12 V trigger on a 3.5 mm jack. Line and speaker inputs each have their own input level control.

Its low-pass filter is active 4th-order with variable cut-off. A bypass switch removes it from the line input only, and the speaker-level input always passes through the filter. Three bass extension positions run from A, the greatest extension, to C, the least. Bass roll-off alignment is chosen with a two-position EQ switch, and phase is set at 0 or 180 degrees.

Power switching offers On, Auto and Standby. Auto sends the ASW610XP to sleep after about 5 minutes without an input signal, and Standby wakes it when 12 V reaches the trigger input. Four M6 spike feet, four M6 rubber feet and four lock nuts are included, and the grille is removable. Bowers & Wilkins offers Matte Black and Matte White cabinets with a black or grey grille.

Pairing

The matching speakers are the 600 Series models. An AV processor connects to the line input with the low-pass filter switched out. A stereo amplifier connects through the speaker-level binding posts. A receiver with a 12 V trigger output switches the subwoofer from Standby.

Alternatives

The Bowers & Wilkins ASW610 has the same 250 mm driver size with a 200 W ICEpower amplifier in a 12.5 kg cabinet.

Spezifikationen