The R11 Meta is the largest of three floorstanding speakers in the KEF R Series, above the R7 Meta and R5 Meta. KEF launched the seven-model R Series with Metamaterial Absorption Technology in February 2023, and the range draws on technologies developed for The Reference. Finishes are Black Gloss, White Gloss and Walnut.
Key specs that matter
Design is three-way bass reflex. The Uni-Q driver array has a 25 mm (1 in.) vented aluminium dome HF unit with MAT and a 125 mm (5 in.) aluminium cone MF unit. Four 165 mm (6.5 in.) hybrid aluminium cone bass units cover the low frequencies. Crossover frequencies are 330 Hz and 2.5 kHz. Frequency response is 46 Hz - 28 kHz (±3 dB), frequency range is 30 Hz - 50 kHz (-6 dB), and typical in-room bass response reaches 26 Hz (-6 dB). Sensitivity is 90 dB (2.83 V/1 m). Nominal impedance is 4 ohms (min. 3.2 ohms), and amplifier requirements are 15 - 300 W. Harmonic distortion (90 dB, 1 m) is below 1% from 33 Hz and below 0.5% from 80 Hz to 20 kHz. Maximum output is 113 dB. Dimensions are 1249 x 200 x 384 mm (H x W x D, with terminal), or 1296 x 311 x 384 mm with the plinth, and weight is 36.5 kg.
Engineering and use context
Metamaterial Absorption Technology, developed jointly with Acoustic Metamaterials Group, is a maze-like structure in which each channel absorbs a specific frequency. KEF quotes absorption of 99% of the unwanted sound from the rear of the tweeter. A conical waveguide couples the dome to the absorber, and a tweeter gap damper with two rings of porous material tames resonances. In the midrange motor a copper ring embedded in the gap reduces inductance and its variation with coil position. A Flexible Decoupling Chassis decouples the midrange motor from the Uni-Q chassis.
Each bass unit has a shallow concave aluminium skin on top of a paper cone. Port flare and profile were calculated with computational fluid dynamics, and the flexible port walls prevent longitudinal resonances. Constrained Layer Damping connects the internal bracing to the drivers and cabinet through a lossy interface. Shadow Flare, a precision-designed cabinet surface, extends its waveguide effect and reduces cabinet diffraction. The microfibre grilles have 1801 precision-cut holes for each driver. A plinth with spike accessories and port bungs are included.
Pairing
An amplifier stable into 4 ohms is required. The R2 Meta and R6 Meta are the matching centre speakers for a home theatre system.
Alternatives
The R7 Meta is the smaller R Series floorstanding speaker, with two 165 mm bass units and crossover points at 400 Hz and 2.4 kHz.