Hifiverse

Standlautsprecher - KEF Blade One Meta

Beschreibung, Bilder, technische Daten und Spezifikationen

KEF Blade One Meta
Bildquelle - (c) KEF

Blade One Meta is the top model in KEF's Blade series and the larger version of the two Blade models. KEF launched it on 18 February 2022 together with the Blade Two Meta and the Reference Meta range. Blade is described by KEF as the world's first Single Apparent Source loudspeaker, and the One Meta is intended for larger rooms. Launch price was USD 35,000 per pair. Every Blade is engineered and handcrafted in Maidstone, Kent, and pairs are matched to within 0.5 dB.

Key specs that matter

Design is three-way bass reflex. The Uni-Q driver array has a 25 mm (1 in.) aluminium dome HF unit with MAT and a 125 mm (5 in.) aluminium cone MF unit. Low frequencies are covered by four 225 mm (9 in.) aluminium cone bass units in a force-cancelling arrangement. Crossover frequencies are 350 Hz and 2 kHz. Frequency response is 35 Hz - 35 kHz (±3 dB), frequency range is 27 Hz - 45 kHz (-6 dB, free field), and typical in-room bass response reaches 20 Hz (-6 dB). Sensitivity is 88 dB (2.83 V/1 m). Nominal impedance is 4 ohms (min. 2.8 ohms). Recommended amplifier power is 50 - 400 W, and maximum SPL is 117 dB at 1 m. THD (90 dB, 1 m) is below 0.5% from 40 Hz to 100 kHz, below 0.2% from 200 Hz to 2 kHz and below 0.1% from 2 kHz to 20 kHz. Dimensions are 1590 x 363 x 540 mm (H x W x D), and weight is 57.2 kg.

Engineering and use context

In the Single Apparent Source configuration the Uni-Q driver array is on the front baffle and the four bass drivers are in the sides of the cabinet. They are mounted back-to-back to cancel out kinetic forces, and each pair of bass drivers is located in its own chamber.

This Uni-Q is the 12th generation and the first in Blade with MAT. Metamaterial Absorption Technology, developed with Acoustic Metamaterials Group, is a maze-like structure behind the tweeter. KEF states that it absorbs 99% of the unwanted sound from the rear of the driver. For the Meta generation the Uni-Q driver also received a new decoupling system and new motor systems, and the crossover was redesigned with low-distortion components. The sculpted cabinet tapers from a gentle front radius and has no acoustic discontinuities on its surface.

Eight finishes are offered - Piano Black/Copper, Piano Black/Grey, Frosted Blue/Blue, Frosted Blue/Bronze, Charcoal Grey/Red, Charcoal Grey/Bronze, Racing Red/Grey and Arctic White/Champagne. A custom colour scheme can be ordered by supplying a Pantone reference.

Pairing

The Blade One Meta is a 4 ohm load that drops below 3 ohms, so the amplifier has to be stable into low impedances. Solid-state stereo power amplifiers or monoblocks within KEF's recommended power range are the usual choice.

Alternatives

The Blade Two Meta is the smaller version, with four 165 mm bass drivers and a height of 1461 mm.

Spezifikationen

  • Modellbezeichnung

    Blade One Meta

  • Untere Grenzfrequenz +/- 3dB (Hz)

    35

  • Obere Grenzfrequenz +/- 3dB (Hz)

    35000

  • Empfindlichkeit (dB at 1 W/1m)

    88

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    50 - 400

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    159.0 × 36.3 × 54.0

  • Gewicht (kg)

    57.2

  • Offizieller Link

Weitere Komponenten