The R5 Meta is the smallest of three floorstanding speakers in KEF's seven-model R Series, below the R7 Meta and R11 Meta. KEF updated the series in 2022 with the 12th generation Uni-Q driver array and Metamaterial Absorption Technology. It can work as a stereo pair or as surround speakers in an R Series home theatre system.
Key specs that matter
Design is three-way bass reflex. Its Uni-Q driver array has a 25 mm vented aluminium dome HF unit with MAT and a 125 mm aluminium cone MF unit, and two 130 mm hybrid aluminium cone bass units sit below it. Crossover frequencies are 400 Hz and 2.7 kHz. Frequency response is 52 Hz - 28 kHz (±3 dB), frequency range is 38 Hz - 50 kHz (-6 dB), and typical in-room bass response reaches 29 Hz (-6 dB). Harmonic distortion (90 dB/1 m) is below 1% from 75 Hz upward and below 0.5% from 110 Hz to 20 kHz. Sensitivity is 87 dB (2.83 V/1 m), nominal impedance is 4 ohms (min. 3.2 ohms), amplifier requirements are 15 - 200 W, and maximum output is 110 dB. Dimensions are 1025 x 175 x 344 mm (H x W x D) with terminal, or 1072 x 272 x 344 mm with plinth, and weight is 24.5 kg.
Engineering and use context
MAT is a maze-like structure developed with Acoustic Metamaterials Group, and KEF states that it absorbs 99% of the unwanted sound from the rear of the tweeter. A conical waveguide couples the tweeter dome to the absorber, and the tweeter gap damper uses two rings of porous material. In the midrange motor a copper ring is embedded into the gap to minimise inductance. The Flexible Decoupling Chassis decouples this motor from the Uni-Q chassis. Shadow Flare, a precision surface around the array, extends the waveguide effect so that the tweeter has no line of sight of the cabinet edges.
Each bass driver has a two-part cone, with a shallow concave aluminium skin on a paper cone. Port walls are flexible to prevent longitudinal resonances in the midrange, and the port flare was calculated by computational fluid dynamics to delay the onset of turbulence. Constrained Layer Damping connects the internal bracing to the drivers and cabinet through a lossy interface. Finishes are Black Gloss, White Gloss and Walnut. Supplied with each speaker are a microfibre grille with 1801 precision-cut holes per driver, plinth and spike accessories and port bungs.
Pairing
An amplifier stable into 4 ohms is required. The matching centre speakers are the R6 Meta and R2 Meta, and the R8 Meta is the Dolby Atmos surround model.
Alternatives
The R7 Meta is the next R Series floorstanding speaker, with two 165 mm hybrid aluminium bass units and the same Uni-Q array.