Hifiverse

Standlautsprecher - KEF Reference 3 Meta

Beschreibung, Bilder, technische Daten und Spezifikationen

KEF Reference 3 Meta
Bildquelle - (c) KEF

KEF's Reference 3 Meta is the smaller of the two three-way floorstanding speakers in The Reference, a range KEF launched in 1973. It is hand-built in Maidstone, Kent, UK, and every pair is matched within 0.5 dB to the laboratory-maintained reference standard. Finishes are Satin Walnut/Silver, High-Gloss White/Blue, High-Gloss White/Champagne, High-Gloss Black/Grey and High-Gloss Black/Copper.

Key specs that matter

Design is three-way bass reflex. The Uni-Q driver array has a 25 mm (1 in.) aluminium dome HF unit with MAT and a 125 mm (5 in.) aluminium cone MF unit, with two 165 mm (6.5 in.) aluminium cone bass units below. Crossover frequencies are 450 Hz and 2.1 kHz. Frequency response is 43 Hz - 35 kHz (±3 dB). Free-field frequency range (-6 dB) is 38 Hz - 45 kHz with the short port and 35 Hz - 45 kHz with the long port, and typical in-room bass response reaches 28 Hz (-6 dB). Sensitivity is 86 dB (2.83 V/1 m), impedance is 4 ohms (min. 3.2 ohms), and amplifier requirements are 50 - 300 W. Maximum output is 113.5 dB (peak SPL at 1 m, pink noise). Harmonic distortion is below 0.5% from 40 Hz to 100 kHz, and 2nd and 3rd harmonics (90 dB, 1 m) stay below 0.1% from 2 kHz to 20 kHz. Dimensions are 1207 x 323 x 467 mm (H x W x D, with grille, terminal and plinth), and weight is 51.3 kg.

Engineering and use context

This bespoke 12th generation Uni-Q has MAT, developed with the Acoustic Metamaterials Group, a maze-like structure behind the tweeter that KEF says absorbs 99% of the unwanted sound from its rear. To make room for it the tweeter gap damper was re-engineered. A copper ring embedded in the midrange motor gap minimises inductance and its variation with coil position, and a flexible decoupling chassis keeps vibration of the MF and HF motor system from reaching the cabinet. Shadow Flare reduces cabinet diffraction.

Each bass unit has a vented magnet assembly, a large aluminium voice coil and a light, stiff alloy cone. With Flexible Port Technology two port tube lengths are supplied, and the flare and profile of each port were calculated by CFD to avoid turbulent air noise. Cabinet shape and bracing geometry were set by finite element analysis to minimise secondary radiation from the sides, and Constrained Layer Damping turns residual vibration into heat.

Pairing

An amplifier stable into low impedances, with current in reserve, is required. In a Reference home cinema it can be the front pair with the Reference 2 Meta or 4 Meta centre.

Alternatives

The KEF Reference 5 Meta is the larger floorstanding model in the series, with four 165 mm bass units and 88 dB sensitivity.

Spezifikationen

  • Modellbezeichnung

    Reference 3 Meta

  • Untere Grenzfrequenz +/- 3dB (Hz)

    43

  • Obere Grenzfrequenz +/- 3dB (Hz)

    35000

  • Empfindlichkeit (dB at 1 W/1m)

    86

  • Impedanz (Ohms)

    4

  • Anforderungen an den Endverstärker (W)

    50 - 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    120.7 × 20.5 × 46.2

  • Gewicht (kg)

    51.3

  • Offizieller Link

Weitere Komponenten