Hifiverse

Standlautsprecher - Odeon Audio Nova S

Beschreibung, Bilder, technische Daten und Spezifikationen

Odeon Audio Nova S
Bildquelle - (c) Odeon Audio

The Nova S is a compact floorstanding loudspeaker from Odeon Audio for listeners with limited space. It is based on the Nova 2022 and adds a compression driver, a modified woofer, WBT binding posts and higher-quality cables and crossover components. Odeon, based in Haltern am See in Germany, lists it in walnut, walnut root, poplar, mango and cherry.

Key specs that matter

This is a two-way design with a crossover at 2.4 kHz. Frequency range is 38 Hz - 24.5 kHz, sensitivity is 91 dB and impedance is 8 ohms. Its cabinet measures 1,010 x 200 x 240 mm (H x W x D) on a 235 x 275 mm base. A 25 mm compression tweeter with a neodymium magnet of over 2 Tesla is loaded by a 170 mm birch multiplex horn. Odeon states that the upper limit extends beyond that of the Orfeo and the standard Nova.

Engineering and use context

Bass and midrange are covered by a custom low-midrange driver made for Odeon by the Danish company Scan Speak outside its normal mass production. It combines a handmade, coated cellulose cone with a fine, flexible rubber surround and a fabric centering. A double magnet increases the magnetic force acting on its voice coil. Odeon describes the tweeter horn as a mechanical amplifier that relieves the tweeter.

Cabinet panels are MDF with a high proportion of wood fibres and binding agents compressed under high pressure, and this board is up to 1.8 times heavier than conventional MDF. Like the Odeon floorstanding loudspeakers, the Nova S has a downward bass reflex system, with the reflex tunnel pointing down rather than to the rear.

Crossover components are selected to a maximum deviation of 1% between channels. All capacitors are non-ageing film types, and the coils come from Mundorf. Instead of Pertinax boards with etched conductor paths, the crossovers are wired by hand, soldered point to point and mechanically secured. German OFC copper connects the woofer, while the tweeter is connected by thin 7N solid-core copper with Teflon insulation. Its WBT Nextgen binding posts are made of gold-plated pure copper, and according to Odeon their design suppresses eddy current effects.

Pairing

An amplifier rated for an 8 ohm load is required.

Alternatives

The Odeon Celeste is a larger two-way floorstanding loudspeaker with a 220 mm GAP bass-midrange driver, a double horn throat design and a rated 93 dB sensitivity.

Spezifikationen

  • Modellbezeichnung

    Nova S

  • Untere Grenzfrequenz +/- 3dB (Hz)

    38

  • Obere Grenzfrequenz +/- 3dB (Hz)

    24 500

  • Empfindlichkeit (dB at 1 W/1m)

    91

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    101 x 20 x 24

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten