Hifiverse

Standlautsprecher - Odeon Audio CARNEGIE

Beschreibung, Bilder, technische Daten und Spezifikationen

Odeon Audio CARNEGIE
Bildquelle - (c) Odeon Audio

The Carnegie is a three-way horn loudspeaker from Odeon Audio, a German company that builds its loudspeakers by hand. Spherical wave and measuring horns of birch multiplex load all three drivers, and the cabinet is offered in Poplar, Palisander, Walnut root, Macassar, Tigerwalnut and Mango veneers.

Key specs that matter

Frequency range is 26 Hz - 29 kHz, sensitivity is 97 dB (8 ohms) and the crossover points are 420 Hz and 2,200 Hz. A 25 mm compression driver with ring radiator technology and a 38 mm Mylar diaphragm sits in a 22 cm measuring horn. Its neodymium magnet produces 2.4 Tesla. The handmade 13 cm midrange driver has a die-cast aluminium basket, an AlNiCo magnet of 1.4 Tesla and a cellulose NAWI membrane, and is loaded by a 42 cm spherical wave horn. For the bass, a 38 cm Audax paper woofer with an oversized ferrite magnet sits in a 60 cm measuring waveguide. Each speaker measures 760 x 1,550 x 790 mm (W x H x D) and weighs 115 kg.

Engineering and use context

Odeon uses a hyperbolic NAWI membrane in place of a conventional cone shape on the midrange driver. Cone and surround are one piece, and the multiple folded edge of the cone acts as the surround instead of a rubber ring. All drivers are positioned on one axis. Like all Odeon Audio floorstanding models, the Carnegie has a bass reflex system with the reflex tunnel pointing down to the base plate, which forms the end of the reflex opening.

Its two-piece, asymmetrical cabinet is made of 24 mm multiplex. According to Odeon, the asymmetry prevents standing waves and allows less damping material to be used.

Crossover components are selected to a maximum deviation of one percent. Oil-paper capacitors from Jantzen, Miflex and Duelund are used, many of them connected together and equipped with bridge capacitors, alongside Mundorf flat coils and non-magnetic resistors. Each crossover is wired by hand, soldered point to point and mechanically secured. Internal wiring is 7N single-crystal copper from Japan, 8 mm2 for the woofer and Teflon-insulated solid core for the midrange and tweeter. WBT nextgen terminals of gold-plated pure copper are mounted on acrylic plates that also carry the crossovers, and plug connections on the acrylic panel set the level of the tweeter and midrange.

Pairing

Low-power triode amplifiers with 300B or 2A3 tubes are sufficient, according to Odeon. A tube amplifier connects to its 8-ohm tap.

Alternatives

The Odeon Audio Semper is a smaller floorstanding horn model rated at 96 dB, 28 Hz - 28 kHz and 1,350 mm in height.

Spezifikationen

  • Modellbezeichnung

    CARNEGIE

  • Untere Grenzfrequenz +/- 3dB (Hz)

    26

  • Obere Grenzfrequenz +/- 3dB (Hz)

    29 000

  • Empfindlichkeit (dB at 1 W/1m)

    97

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    155 x 76 x 79

  • Gewicht (kg)

    N/A

  • Offizieller Link

Weitere Komponenten