The Nova 2022 is a compact two-way floorstanding loudspeaker from Odeon Audio, whose speakers are handmade in Germany. Its cabinet has the Odeon wedge design. A 25 mm dome tweeter sits in a birch plywood horn made by Odeon Audio, above a Scan-Speak bass-midrange driver in a downward-firing bass reflex enclosure. Finishes are Walnut, Oak and Cherry.
Key specs that matter
Frequency range is 38 Hz - 24.5 kHz. Sensitivity is 91 dB, with a nominal impedance of 8 ohms. The crossover point is 2,200 Hz. Cabinet dimensions are 100 x 20 x 24 cm (H x W x D), and the socket measures 23.5 x 27.5 cm (W x D).
Engineering and use context
Odeon describes the horn as a mechanical amplifier that relieves the tweeter. The tweeter itself is a special design by the French manufacturer Audax, with a copper voice coil and a dome of specially impregnated fabric. Below it, the bass-midrange driver comes from the Danish company Scan-Speak. It has a handmade, coated cellulose cone, a fine and flexible rubber surround, fabric centering and a double magnet.
Cabinet walls are medium density fibreboard compressed under high pressure. According to Odeon, this MDF is up to 1.8 times heavier than conventional MDF.
Each crossover is wired by hand, soldered point to point and then mechanically secured. Odeon selects components to a maximum deviation of one percent and uses only film capacitors as non-ageing parts, while the coils come from Mundorf. The complete crossover is housed on the acrylic panels that also carry the loudspeaker binding posts. Internal wiring is oxygen-free copper (OFC) cable of German production, and the tweeter cable has multiple mechanical shielding.
Pairing
The Nova 2022 can be combined with transistor and tube amplifiers. An amplifier rated for 8-ohm loads is required.
Alternatives
The Odeon Audio Nova S is another floorstanding model in the Nova line.