MUON is a floorstanding loudspeaker designed for KEF by the industrial designer Ross Lovegrove and built as a limited edition of 100 pairs. KEF calls it a KEF Concept. Each speaker is individually crafted in KEF's Maidstone workshop and measured in its anechoic chambers, and it comes with a certificate showing its own frequency response curve, signed by the craftsman who made it.
Key specs that matter
Design is a four-way closed box floorstanding loudspeaker with an ACE enclosure. The driver complement is six 250 mm (10 in.) LF units, one 250 mm (10 in.) LMF unit and a Uni-Q driver array with a 125 mm (5 in.) Li-Mg-Al/LCP hybrid cone MF unit and a 25 mm (1 in.) vented aluminium dome HF unit with KEF's Tangerine Waveguide. Crossover frequencies are 120 Hz, 300 Hz and 2.3 kHz. Frequency response is 25 Hz - 60 kHz (±3 dB), with low frequency extension to 20 Hz (-6 dB) and high frequency extension to 100 kHz (-10 dB), all typical in-room figures. Sensitivity is 90 dB (2.83 V/1 m), and input impedance is 4 ohms. Amplifier requirements are 100 - 400 W (typical), and maximum output is 118 dB. Each speaker measures 2000 x 600 x 380 mm (H x W x D) and weighs 115 kg.
Engineering and use context
The enclosure is super-formed aluminium, a moulding process similar to vacuum forming in which heated sheets of aluminium are shaped. Its shell is 6 mm thick. Inside are strengthening braces and a coating of damping compound. Sealed enclosures separate all the drive units from each other.
KEF's proprietary ACE technology uses granules of activated carbon in the enclosures. By adsorption of air molecules it almost doubles the available volume, according to KEF. Four of the bass units are mounted in the front, and two more are mounted in the back for low frequency directivity control. The bass and lower midrange units have neodymium magnet systems, and the LMF unit has a chromed phase plug.
In the Uni-Q driver array the tweeter is placed in the acoustic centre of the midrange cone, and both act as a single source. The curved cabinet removes the sharp edges that cause diffraction around the Uni-Q array. CAD/CAM software was used for the design and manufacture of the shape.
Pairing
An amplifier stable into 4 ohms and within KEF's recommended power range is required. A stereo power amplifier or a pair of monoblocks meets this requirement.
Alternatives
The Blade One Meta is the top model in KEF's Blade series, a three-way floorstanding loudspeaker with four 225 mm force-cancelling bass drivers.