Hifiverse

Regallautsprecher - Klipsch RP-600M II

Beschreibung, Bilder, technische Daten und Spezifikationen

Klipsch RP-600M II
Bildquelle - (c) Klipsch

The RP-600M II is a two-way bookshelf loudspeaker in the second generation of the Klipsch Reference Premiere series. Klipsch is the American company founded by Paul W. Klipsch in 1946, and this model combines a horn-loaded tweeter with a Cerametallic cone woofer. Against the first RP-600M it has a larger tweeter horn, a redesigned woofer and motor, and a revised input panel. Finishes are ebony vinyl and walnut vinyl with satin painted baffles.

Key specs that matter

Frequency response is 44 Hz - 25 kHz (±3 dB). Sensitivity is 94.5 dB (2.83 V/1 m), measured half-space anechoic and stated as in-room sensitivity. Nominal impedance is 8 ohms, and power handling is 100 W continuous and 400 W peak. The crossover frequency is 1,500 Hz. Each speaker measures 40.0 x 20.2 x 33.0 cm (H x W x D) and weighs 8.2 kg.

Engineering and use context

A 1-inch titanium LTS (Linear Travel Suspension) vented tweeter is mounted in a 90 x 90 degree silicone composite hybrid Tractrix horn. Klipsch specifies the horn loading for efficiency and for focusing high frequencies towards the listening area. Its phase plug and compression moulded silicone face are specified for a smooth frequency response, and the second generation increases the horn size. According to Klipsch, the Linear Travel Suspension minimises distortion, while the vented tweeter housing reduces standing waves that create unwanted harmonics.

Below the crossover sits a 6.5-inch Cerametallic cone woofer, rigid and lightweight for low distortion and high efficiency. New aluminium shorting rings, which Klipsch calls Faraday rings, reduce distortion and raise power handling, and a new motor structure improves transient response. Bass reflex loading is via a rear Tractrix port with custom inner flares that reduce air turbulence and port noise. The MDF enclosure is internally braced, with additional bracing against resonance and vibration.

The input panel carries dual aluminium binding posts. A removable grille attaches magnetically, and cork pads replace rubber bumpers for security on a stand or a table.

Pairing

An amplifier rated for an 8 ohm load is required. The dual binding posts allow bi-wiring or bi-amping with outboard crossovers and separate amplifiers.

Alternatives

Klipsch's RP-500M II is the smaller bookshelf model of the same series, with a 5.25-inch Cerametallic cone woofer.

Spezifikationen

  • Modellbezeichnung

    RP-600M II

  • Untere Grenzfrequenz +/- 3dB (Hz)

    44

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25000

  • Empfindlichkeit (dB at 1 W/1m)

    94.5

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    100 - 400

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    40.0 × 20.2 × 33.0

  • Gewicht (kg)

    8.2

  • Offizieller Link

Weitere Komponenten