The Nines II is the largest of the three second-generation powered speaker pairs that Klipsch introduced at CES 2026, its 80th anniversary year, above The Fives II and The Sevens II. Its all-new electronics package comes from a collaboration with Onkyo and uses an AV receiver architecture. Klipsch states that the optimised design makes the speakers more compact than before. The US price is USD 2,399.99 per pair, with deliveries from spring 2026.
Key specs that matter
This is a powered two-way monitor pair. Frequency response is 31 Hz - 25 kHz (±3 dB), and maximum output is 107 dB (1 m, stereo pair). Each cabinet has a 25 mm titanium LTS vented tweeter with a Tractrix horn and a 203 mm Jet Cerametallic woofer. Enclosure type is bass reflex via a rear-firing port, in MDF with genuine wood veneer. Dimensions are 460 x 245 x 375 mm (H x W x D). The primary speaker weighs 14.9 kg and the secondary 14.43 kg. Power supply is internal, 100 - 240 V, 50/60 Hz.
Engineering and use context
A one-piece BMC baffle with a curved radius is used, and Klipsch describes it as denser and more rigid than before. Over the wired L-R link the pair runs at 96 kHz/24-bit, and an optional wireless L-R link runs at 48 kHz.
Audio modes include Dolby Atmos playback with virtual height channels and DTS:X decoding, plus Music, Movie, Direct and dialogue modes and a 5-band EQ. HDMI is version 2.1, with pass-through of 8K, HDR10+, Dolby Vision and BT.2020 colour, VRR, ALLM and QFT, eARC with CEC on the main output and HDCP 2.3.
For network use there is 2.4/5 GHz 802.11ac Wi-Fi (2x2 MIMO) and 10BASE-T/100BASE-TX Ethernet for network and IP control. Built-in streaming covers Google Cast, Apple AirPlay 2, Spotify Connect, Tidal Connect and Qobuz Connect. Bluetooth 5.4 carries SBC and AAC. Other inputs are RCA phono with a built-in phono stage, RCA analogue, USB-C audio, USB-A, optical, coaxial and a calibration microphone input. Outputs are HDMI and a single RCA line-level output for a subwoofer.
Supplied with the pair are a 2.0 m region-specific power cord, a remote control with two AAA batteries, a 4 m four-conductor speaker cable, a 1.5 m HDMI cable and a calibration microphone. Finishes are Walnut, Ebony and Red Oak, the last with a white baffle and light-grey grilles.
Pairing
A turntable connects directly to the phono input. A powered subwoofer connects to the RCA line-level output. Klipsch lists the KS-24 as the compatible speaker stand.
Alternatives
The Klipsch The Sevens II is the smaller powered pair of the same generation, with a 165 mm Jet Cerametallic woofer.