Hifiverse

Regallautsprecher - Klipsch RP-500M II

Beschreibung, Bilder, technische Daten und Spezifikationen

Klipsch RP-500M II
Bildquelle - (c) Klipsch

The RP-500M II is a passive two-way bookshelf speaker in the Reference Premiere series of Klipsch Group, Indianapolis. It is the second-generation version of the RP-500M. Two finishes are listed, ebony vinyl and walnut vinyl, each with a satin painted baffle and a scratch-resistant surface.

Key specs that matter

Drive units are a 25 mm titanium LTS vented tweeter with a hybrid cross-section expanded Tractrix horn and a 133 mm Cerametallic cone woofer with Faraday rings. Crossover frequency is 1.53 kHz. Frequency response is 50 Hz - 25 kHz (±3 dB). Klipsch quotes in-room sensitivity of 92 dB (2.83 V/1 m, half-space anechoic). Power handling is 75 W continuous and 300 W peak, and nominal impedance is 8 ohms. Enclosure type is bass reflex with a rear Tractrix port, in internally braced MDF. Inputs are single aluminium binding posts. Dimensions are 344 x 173 x 270 mm (H x W x D), and weight is 5.95 kg.

Engineering and use context

For the second generation Klipsch increased the size of the horn, which is a 90 x 90 silicone composite hybrid Tractrix design. Horn loading focuses high frequencies towards the listening area. A phase plug and a compression moulded silicone face are added, and Klipsch states that they ensure smooth frequency response. Behind the titanium diaphragm, the vented tweeter housing reduces standing waves. Linear Travel Suspension, according to the company, minimises distortion.

Klipsch specifies its Cerametallic woofers as rigid and lightweight. In this all-new woofer, aluminium shorting rings reduce distortion and increase power handling, and the motor structure is also new.

Its port uses Tractrix geometry with custom inner flares that reduce air turbulence entering the port and lower port noise. A new input panel carries audiophile-grade internal wire. Cork pads replace rubber bumpers for security on a stand or table, and the strong, flexible grille is removable and attaches magnetically.

Pairing

An amplifier rated for 8-ohm loads is required. The single set of binding posts does not allow bi-wiring or bi-amping.

Alternatives

The RP-600M II is the larger bookshelf model of the Reference Premiere II family, with a 165 mm Cerametallic woofer.

Spezifikationen

  • Modellbezeichnung

    RP-500M II

  • Untere Grenzfrequenz +/- 3dB (Hz)

    50

  • Obere Grenzfrequenz +/- 3dB (Hz)

    25000

  • Empfindlichkeit (dB at 1 W/1m)

    92

  • Impedanz (Ohms)

    8

  • Anforderungen an den Endverstärker (W)

    75 - 300

  • Verfügt über interne Verstärkung

    k. A.

  • Leistung der internen Verstärkung (W)

    N/A

  • Größe (sm)

    34.4 × 17.3 × 27.0

  • Gewicht (kg)

    5.95

  • Offizieller Link

Weitere Komponenten