The Fives II is a pair of powered speakers from Klipsch with 5.25-inch woofers, Tractrix horn tweeters and an electronics package developed in collaboration with Onkyo. Klipsch describes the electronics as an AVR architecture inside a stereo pair, with HDMI eARC, Dolby Atmos playback and built-in streaming. A primary speaker carries the electronics and connects to the secondary speaker over a 4-conductor speaker cable.
Key specs that matter
System description is Powered Monitor (pair). Frequency response is 50 Hz - 25 kHz (±3 dB), and maximum output is 103 dB (1 m, stereo pair). Each speaker has a 1-inch (2.5 cm) titanium LTS vented tweeter with a Tractrix horn and a 5.25-inch Jet Cerametallic woofer. Enclosure type is bass reflex via a rear-firing port, in MDF with genuine wood veneer. High-resolution audio is supported up to 96 kHz/24-bit. Dimensions are 327 x 181 x 273.1 mm (H x W x D), and weights are 8.26 kg for the primary and 7.16 kg for the secondary speaker.
Engineering and use context
A one-piece BMC baffle is used. Klipsch describes it as denser and more rigid, and its curved radius is intended to improve off-axis response. Finishes are Walnut, Ebony and Red Oak, the Red Oak version with a white baffle and light-grey removable grilles.
Inputs are HDMI-ARC/eARC with CEC, Bluetooth 5.4 (SBC and AAC codecs), RCA phono with a ground terminal, RCA analogue, USB-C audio, USB-A and optical digital. Outputs are a single RCA line-level subwoofer output and an HDMI output. The HDMI 2.1 pass-through supports 8K, HDR10+, Dolby Vision and BT.2020 colour, together with VRR, ALLM and QFT. Network connectivity is dual-band 802.11ac (2x2 MIMO) Wi-Fi and 10BASE-T/100BASE-TX Ethernet for network and IP control. Built-in streaming covers Google Cast, Apple AirPlay 2, Spotify Connect, Tidal Connect and Qobuz Connect.
Dolby Atmos playback uses virtual height channels, and the listening modes are Music, Movie, Direct and a dialogue mode, with a 5-band EQ. On the top edge of the primary speaker sit a metal volume wheel and a source button. A backlit remote and the Klipsch Connect app control inputs and presets. Power comes from a 100 - 240 V, 50/60 Hz internal supply, and the box contains a 2 m power cord, the remote with two AAA batteries, a 4 m speaker cable and a 1.5 m HDMI cable.
Pairing
A TV with HDMI ARC or eARC is required for the single-cable connection. A turntable connects to the phono input with its built-in phono stage. A powered subwoofer with an RCA line input connects to the sub output. The compatible stand is the Klipsch KS-28.
Alternatives
The Klipsch R-50PM is a simpler powered pair with a 5.25-inch woofer, a phono input and no HDMI or network streaming.