Hifiverse

Regallautsprecher - Edifier R1280DB

Beschreibung, Bilder, technische Daten und Spezifikationen

Edifier R1280DB
Bildquelle - (c) Edifier

The R1280DB is an active two-way bookshelf speaker system from Edifier's R series, combining Bluetooth reception with optical and coaxial digital inputs and two analogue line inputs. One speaker is active and carries the amplifier, the controls and the input panel, while the second is passive. Edifier priced the pair at USD 189.99, in black, brown and silver white finishes.

Key specs that matter

Total output power is 21 W + 21 W RMS, 42 W for the pair. Each speaker has a 116 mm bass unit and a 13 mm silk dome tweeter, divided by a 2-way active crossover. Frequency response is 55 Hz - 20 kHz. Signal-to-noise ratio is ≥85 dB(A), and noise level is ≤25 dB(A). Input sensitivity is 450 ± 50 mV on Line In 1, 550 ± 50 mV on Line In 2, 500 ± 50 mFFS on optical and coaxial and 700 ± 50 mFFS over Bluetooth. Bluetooth version is 5.1. Each speaker measures 146 x 234 x 196 mm (W x H x D), and net weight is 4.9 kg.

Engineering and use context

Both enclosures are 100% MDF, chosen by Edifier to minimize acoustic resonance. A calibrated, flared bass reflex port is on the front baffle. Treble, bass and master volume dials are mounted on the side panel of the active speaker, next to the infrared receiver. Pressing the master volume control steps through Line In 1, Line In 2, optical, coaxial and Bluetooth, and holding it puts the system into standby. Its power indicator is green for the line inputs, red for optical or coaxial and blue for Bluetooth.

In optical and coaxial modes only PCM at 44.1 kHz or 48 kHz is decoded. Bluetooth supports the A2DP and AVRCP profiles, effective range is 10 m, and the PIN code is 0000 where a source asks for one. The remote control covers power, mute, volume, direct input selection and, in Bluetooth mode, play, pause and track skip. It runs on a CR2025 cell. Supplied are the speaker connecting cable, a 3.5 mm to RCA cable, an RCA to RCA cable and a fiber optic cable.

Pairing

A digital source with PCM output at 44.1 kHz or 48 kHz is required for the optical and coaxial inputs. A turntable requires an external phono stage. There is no subwoofer output.

Alternatives

The Edifier R1280DBs uses the same cabinet size and power rating and adds a Sub Out port and a quoted bass limit of 51 Hz.

Spezifikationen

  • Modellbezeichnung

    R1280DB

  • Untere Grenzfrequenz +/- 3dB (Hz)

    55

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    21 + 21

  • Größe (sm)

    14.6 × 23.4 × 19.6

  • Gewicht (kg)

    4.9

  • Offizieller Link

Weitere Komponenten