Hifiverse

Regallautsprecher - Edifier R1000T4

Beschreibung, Bilder, technische Daten und Spezifikationen

Edifier R1000T4
Bildquelle - (c) Edifier

The R1000T4 is a 2.0 bookshelf speaker system in Edifier's R series. It consists of an active speaker and a passive speaker in wooden enclosures, and both inputs are analogue RCA, with no Bluetooth or digital connection. Edifier designs it for bookshelf or desktop use and lists it in black.

Key specs that matter

Total power output is 12 W + 12 W RMS (DRC on), or 24 W RMS for the system. Each speaker has a 116 mm mid-range and bass driver and a 13 mm silk dome tweeter. Frequency response is 75 Hz - 18 kHz (±9 dB). Signal-to-noise ratio is ≥85 dB(A), and amplifier distortion is ≤0.5%. Input sensitivity is 700 mV ± 50 mV on the PC input and 550 mV ± 50 mV on the AUX input. Each speaker measures 148 x 233 x 198 mm (W x H x D). Net weight is approx. 4.2 kg, gross weight approx. 5.1 kg.

Engineering and use context

Amplification is Class-D with a built-in DRC controller, and the amplifier is housed in the active speaker. According to Edifier, the wooden enclosure minimizes acoustic resonance and reduces distortion. On the rear panel of the active speaker are the bass adjustment knob, the master volume control, the two RCA line inputs, the power switch, the power cord and the connector for the secondary speaker.

A speaker connecting cable joins the passive speaker to the active one, with correct polarity required at both ends. Edifier allows this cable to be replaced or lengthened and recommends oxygen-free copper (OFC) cable for that purpose. Its manual also advises switching on the audio source before the speakers to avoid a pop at power-on. Inside the box are the active speaker, the passive speaker, the speaker connecting cable, a 3.5 mm to dual RCA audio cable, an RCA to RCA audio cable and the user manual.

Pairing

A source with an analogue RCA line output or a 3.5 mm output is required. Two sources can stay connected to the PC and AUX inputs at the same time. A turntable requires an external phono stage. No external amplifier is used.

Alternatives

The Edifier R1280T is the larger dual-RCA model in the R series, with 21 W + 21 W RMS and separate treble and bass dials.

Spezifikationen

  • Modellbezeichnung

    R1000T4

  • Untere Grenzfrequenz +/- 3dB (Hz)

    75

  • Obere Grenzfrequenz +/- 3dB (Hz)

    18 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    12 + 12

  • Größe (sm)

    14.8 × 23.3 x 19.8

  • Gewicht (kg)

    4.2

  • Offizieller Link

Weitere Komponenten