The Airpulse A80 is the compact active bookshelf speaker system in the range of Airpulse, a brand of Edifier, and was designed with input from Phil Jones. It is sold as an active and a passive speaker with a remote control, carries Hi-Res Audio certification and has a walnut finish. In the US the pair was listed at USD 699.99.
Key specs that matter
Each cabinet has a horn-loaded ribbon tweeter with a thin aluminium ribbon diaphragm, the same tweeter as in the Airpulse A100, and a 115 mm mid-woofer with a 30 mm voice coil. Output power (RMS) is 10 W + 10 W for the tweeters and 40 W + 40 W for the woofers. Frequency range is 52 Hz - 40 kHz, with a signal-to-noise ratio of 90 dB(A) or better. Inputs are AUX, PC, USB, optical and Bluetooth 5.0 with aptX, and the USB and optical inputs accept up to 192 kHz. Input sensitivity is 450 ± 50 mV on AUX and 550 ± 50 mV on the PC input. A subwoofer output gives 1200 mV max and follows the master volume. Mains voltage is 100-240 V AC, 50/60 Hz. Each cabinet measures 140 x 250 x 220 mm, and the set weighs 9.3 kg.
Engineering and use context
Its mid-woofer has a hard-anodised aluminium alloy cone in a cast magnesium alloy frame. Edifier calls the cone PAAC (Proprietary Aluminum Alloy Cone) and says it was developed with a Klippel Laser Doppler Interferometer. A 30 mm voice coil is larger than usual for a driver of this size, and Edifier states that larger coils run at a lower temperature and have less power compression.
All digital functions run on an XMOS XU216, a 16-core processor of the xCore200 architecture rated at up to 2000 MIPS. Power amplification uses two Texas Instruments TAS5754 Class D amplifiers. The Bluetooth receiver is built on a Qualcomm Bluetooth 5.0 chipset with an aptX decoder. Over USB the A80 is a USB Audio Class 2 device. Mac computers need no driver, and Windows users install the A80 USB driver.
Cabinets are 18 mm MDF with a walnut finish, fully lined inside with waved sound absorption material. Each has an oval vent tube shaped to minimise wind noise. Internal wiring is audiophile-grade speaker cable made in the USA. Two isolation pads that tilt the cabinets up by 8 degrees are included to reduce vibration.
Pairing
The subwoofer output connects to the audio input of a powered subwoofer with an RCA cable, which is not included. A turntable requires an external phono stage. The box contains speaker connecting, USB, 3.5 mm to RCA, RCA, optical and power cables.
Alternatives
The Airpulse A100 is an active bookshelf system from the same Airpulse range.