Hifiverse

Regallautsprecher - Edifier Airpulse A300 Pro

Beschreibung, Bilder, technische Daten und Spezifikationen

Edifier Airpulse A300 Pro
Bildquelle - (c) Edifier

The A300 Pro is an active bookshelf speaker system from AirPulse, the high-end brand of the Edifier group. It succeeded the A300 around 2020 to 2021 and sells for about USD 1,999 to 2,299 per pair. Its rear panel is marked Designed by Phil Jones. Each cabinet has its own DSP and amplifiers, and the two speakers are linked wirelessly. Walnut wood is the finish.

Key specs that matter

Each speaker has a horn-loaded ribbon tweeter and a 165 mm aluminium cone mid-woofer with an underhung neodymium motor. Output power is 10 W + 10 W for the tweeters and 120 W + 120 W for the woofers (RMS). Frequency response is 40 Hz - 40 kHz, and signal-to-noise ratio is ≥ 90 dB(A). Inputs are balanced XLR, unbalanced RCA, AUX, USB, optical, coaxial and Bluetooth 5.0 with aptX. Input sensitivity is 700 ±50 mV on AUX and 1100 ±50 mV on the balanced input. Each cabinet measures 225 x 385 x 350 mm (W x H x D), and net weight is 24.3 kg.

Engineering and use context

AirPulse uses a digital amplifier system with an XMOS processor. Through DSP the built-in amplifiers drive the tweeter and the woofer separately. A 150 W power supply is installed. On USB the XMOS interface chip works to USB Audio Class 2, so Windows requires the AirPulse driver, while macOS needs none. Optical and USB accept PCM at 44.1, 48, 96 and 192 kHz only.

An INPUT SELECT switch on both speakers sets the mode. In the BALANCED and UNBALANCED positions each speaker receives its own XLR or RCA cable and works independently. Rear dials then adjust treble within ±3 dB and bass within ±6 dB. In the OTHERS position the sources connect to the right speaker over AUX, coaxial, optical, USB or Bluetooth, and the left speaker receives the signal through a 5.8 GHz wireless module. Both speakers are paired at the factory. An LED display shows the source, volume and tone settings, and a wireless remote control is included. Also in the box are an RCA cable, a USB cable, an optical cable and two power cables, but no XLR cable.

Pairing

Balanced mode requires a preamplifier or audio interface with XLR outputs. Without the driver, Windows limits USB playback to 96 kHz. Bluetooth sources with aptX use the built-in decoder.

Alternatives

The AirPulse A200 is a smaller active bookshelf speaker from the same brand.

Spezifikationen

  • Modellbezeichnung

    Airpulse A300 Pro

  • Untere Grenzfrequenz +/- 3dB (Hz)

    40

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    10 + 10, 120 + 120

  • Größe (sm)

    22.5 x 38.5 x 35.0

  • Gewicht (kg)

    24.3

  • Offizieller Link

Weitere Komponenten