Hifiverse

Regallautsprecher - Edifier Airpulse A300

Beschreibung, Bilder, technische Daten und Spezifikationen

Edifier Airpulse A300
Bildquelle - (c) Edifier

The Airpulse A300 is an active bookshelf speaker system from Airpulse, a brand of Edifier, sold as a pair of one active and one passive speaker with a remote control. Edifier states that all technical and design aspects of the A300 were done by audio engineer Phil Jones. Its horn-loaded ribbon tweeter inherits the mechanism of the tweeter in the Airpulse 7001 near-field monitor. The pair is Hi-Res Audio certified and was listed in the US at USD 1,499.99, with ST300 stands made for it.

Key specs that matter

Each cabinet has a 65 mm aluminium horn-loaded ribbon tweeter and a 165 mm aluminium cone mid-woofer of underhung design with a neodymium magnet. Output power (RMS) is 10 W + 10 W for the tweeters and 70 W + 70 W for the woofers. Frequency range is 40 Hz - 40 kHz, and signal-to-noise ratio is 90 dB(A) or better. Inputs are AUX, balanced, USB, optical, coaxial and Bluetooth 5.0 with aptX, and the USB, optical and coaxial inputs accept up to 192 kHz. Input sensitivity is 700 ± 50 mV on AUX and 1150 ± 50 mV on the balanced input. Mains voltage is 100-240 V AC, 50/60 Hz. Each cabinet measures 225 x 385 x 340 mm (W x H x D), and the set weighs 24 kg net, 29 kg packed.

Engineering and use context

In the mid-woofer, a 50 mm edge-wound voice coil of copper-clad aluminium ribbon wire drives the aluminium cone. According to Edifier, this coil is used for maximum linear excursion and control. Amplification is digital, with an XMOS processor and three Texas Instruments TAS5754 Class D amplifier chips. Two of them are bridged in parallel and drive the left and right woofers, and the third runs in bridge mode for both tweeters.

A Texas Instruments PCM9211 is the S/PDIF receiver. It accepts up to 216 kHz and passes the signal to the XMOS processor. Its USB audio interface is UAC2 with a 192 kHz input sample rate. Mac computers need no driver, while Windows users install the A300 USB driver for 192 kHz playback.

Cabinets are 25 mm MDF in cherry veneer with a satin lacquer finish, lined inside with 36 mm of professional-grade sound absorption material. Bass, treble and volume controls are on the back panel of the active speaker. From the remote, inputs are switched, volume is adjusted and the speakers are muted.

Pairing

A turntable requires an external phono stage. The balanced input accepts a professional line-level source. Between the two cabinets runs the supplied speaker connecting cable. In the box are also RCA, RCA to 3.5 mm, USB, optical and power cables.

Alternatives

The Airpulse A200 is the smaller active bookshelf system in the same Airpulse range.

Spezifikationen

  • Modellbezeichnung

    Airpulse A300

  • Untere Grenzfrequenz +/- 3dB (Hz)

    40

  • Obere Grenzfrequenz +/- 3dB (Hz)

    40 000

  • Empfindlichkeit (dB at 1 W/1m)

    N/A

  • Impedanz (Ohms)

    N/A

  • Anforderungen an den Endverstärker (W)

    N/A

  • Verfügt über interne Verstärkung

    Ja

  • Leistung der internen Verstärkung (W)

    10 + 10, 70 + 70

  • Größe (sm)

    22.5 x 38.5 x 34.0

  • Gewicht (kg)

    24

  • Offizieller Link

Weitere Komponenten