Hifiverse

Kopfhörer - Moondrop VARIATIONS

Beschreibung, Bilder, technische Daten und Spezifikationen

Moondrop VARIATIONS
Bildquelle - (c) Moondrop

VARIATIONS is a Moondrop in-ear monitor with a 1DD + 2BA + 2EST driver configuration - one dynamic driver, two balanced armatures and two electrostatic drivers in each shell. It launched at USD 520 and was later listed at USD 599. Moondrop adjusts the frequency response to its VDSF Target.

Key specs that matter

Frequency response range is 9 Hz - 40 kHz (IEC 61094, free field), and effective frequency response is 20 Hz - 20 kHz (IEC 60318-4, -3 dB). Sensitivity is 118 dB/Vrms (1 kHz), impedance is 15.2 ohms ±15% (1 kHz), and THD is below 1% (1 kHz). Bass comes from a 10 mm dynamic driver with a liquid crystal diaphragm and a composite copper inner cavity. For the mids Moondrop uses the Softears-D-Mid-B, a deeply customised composite balanced armature driver, while the highs driver is a Sonion high-power dual electrostatic unit. Cavity material is stainless steel and resin. A PCC coaxial single-crystal copper cable comes with interchangeable 3.5 mm, 2.5 mm and 4.4 mm plugs. Also in the box are tweezers, ten filters, a storage bag, three pairs of silicone ear-tips and three pairs of T55 foam ear-tips (S, M, L each), a QC card, a manual and a postcard.

Engineering and use context

Each shell combines a 3D-printed physical filter structure with a frequency division (crossover) circuit. Its acoustic channel is also 3D printed and is combined with damping materials. On the electrical side Moondrop lists a CR low-pass filter circuit, a high-pass filter circuit and an equalisation circuit, aimed at the target frequency response and phase.

Its resin cavity part is 3D printed from medical resin with a frosted surface texture.

Pairing

The interchangeable plugs connect the stock cable to single-ended and balanced headphone outputs without adapters. A portable player, USB DAC or desktop headphone amplifier is required as the source.

Alternatives

The Moondrop Psyche is a multi-driver in-ear monitor that combines dynamic, balanced armature and planar drivers.

Spezifikationen

  • Modellbezeichnung

    VARIATIONS

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    In-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    9

  • Obere Grenzfrequenz +/- 10dB (Hz)

    40 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    118

  • Impedanz (Ohm (1 kHz))

    15.2

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link