Hifiverse

Kopfhörer - Moondrop STELLARIS

Beschreibung, Bilder, technische Daten und Spezifikationen

Moondrop STELLARIS
Bildquelle - (c) Moondrop

The STELLARIS is a wired in-ear monitor from Moondrop, listed by the company as Planar IEMs, with a single 14.5 mm planar magnetic driver in each shell. Listed prices have ranged from USD 109.99 to USD 129.99. Its shells carry an iridescent finish that shows different colours under varying angles and light, shifting from deep blue to purple on Moondrop's Chinese product page. Moondrop tunes the frequency response to its VDSF Target Response.

Key specs that matter

Driver configuration is one 14.5 mm planar driver per side. Sensitivity is 117 dB/Vrms (1 kHz), and impedance is 36 ohms ±15% (1 kHz). Frequency response is 10 Hz - 50 kHz, with an effective frequency response of 20 Hz - 20 kHz (IEC 60318-4, -3 dB). Each shell has a 0.78 mm 2-pin socket, and the stock cable ends in a 3.5 mm stereo plug. Inside the box are the cable, a storage bag, three pairs of T41 foam MIS-Tips and three pairs of U.C. silicone ear-tips (S, M, L each), a QC certificate, a manual and a postcard.

Engineering and use context

An independent built-in acoustic cavity is attached to the planar driver, and Moondrop states that it reduces linear distortion. Around the diaphragm sits a fully symmetrical magnetic circuit of 7+7 N52H magnets, which the Chinese specification credits with a maximum flux of 1 tesla in the magnetic gap and higher magnetic circuit efficiency. Its conductor is a circuit etched onto the diaphragm in a micron-scale process. According to Moondrop, the higher etching precision and the thinner diaphragm lower split vibration and nonlinear distortion.

Pairing

The stock cable requires a single-ended headphone output. A balanced source requires a separate 2-pin cable with a balanced plug. Replacement cables with 0.78 mm 2-pin connectors fit the sockets.

Alternatives

The Moondrop Blessing 3 is a hybrid in-ear monitor with two dynamic drivers and four balanced armatures per side.

Spezifikationen

  • Modellbezeichnung

    STELLARIS

  • Wandlerprinzip

    Electostatic or Planar magnetic

  • Bauart

    Closed

  • Tragestil

    In-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    10

  • Obere Grenzfrequenz +/- 10dB (Hz)

    50 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    3.5

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    117

  • Impedanz (Ohm (1 kHz))

    36

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link