Hifiverse

Kopfhörer - Moondrop MAY

Beschreibung, Bilder, technische Daten und Spezifikationen

Moondrop MAY
Bildquelle - (c) Moondrop

MAY is a hybrid in-ear monitor from MOONDROP that pairs a dynamic driver with a planar magnetic driver and connects through a USB-C cable with a built-in DSP. MOONDROP calls the dual-driver layout a UWBS combination. The shell is medical-grade resin, 3D printed in cooperation with HeyGears.

Key specs that matter

Drivers - 10 mm sapphire-plated diaphragm dynamic driver and 6 mm annular planar magnetic driver. Frequency response is 7 Hz - 39 kHz, and effective frequency response is 20 Hz - 20 kHz (IEC60318-4, 3 dB). Impedance is 30 ohms ±15% (1 kHz), sensitivity is 120 dB/Vrms (1 kHz), and THD at 1 kHz is 0.05% or less. Earphone jack - 0.78 mm 2-pin. Cable plug - USB-C. The DSP decodes PCM up to 32-bit/384 kHz, with dynamic range up to 120 dB and THD as low as 0.00078% (measured on an APx555).

Engineering and use context

Above 8,000 Hz the treble is reproduced by the 6 mm annular planar driver. The dynamic driver has a newly developed sapphire-evaporation composite flexible-suspension diaphragm. Coupling between the two drivers comes from a powered two-way crossover and acoustic FEA optimization verified by repeated testing.

Inside the USB-C plug is a customized audio chip with a variable DSP, a fully balanced output and a four-layer immersion gold circuit board. Crossover and tuning are set in the DSP to match the VDSF target response. Five preset tunings are available, and the MOONDROP Link 2.0 app adds a parametric equalizer and the download and upload of tuning configurations. Tuning is not possible on iOS, but settings made on an Android device stay in place when the earphones are used with iOS devices.

A three-button in-line module with a microphone controls volume, playback and calls. Its cable is interchangeable, and the earpieces also accept Bluetooth neckband or TWS ear-hook modules. A leather case is included.

Pairing

A smartphone, tablet or computer with a USB-C port is required, and no separate driver installation is needed. DSP tuning requires the MOONDROP Link 2.0 app on Android.

Alternatives

The ILLUMINATION is another wired MOONDROP in-ear monitor, with a single 11 mm dynamic driver in a titanium alloy cavity.

Spezifikationen

  • Modellbezeichnung

    MAY

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    In-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    7

  • Obere Grenzfrequenz +/- 10dB (Hz)

    39 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    USB-C

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    120

  • Impedanz (Ohm (1 kHz))

    30

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link