Hifiverse

Kopfhörer - Moondrop BLESSING2

Beschreibung, Bilder, technische Daten und Spezifikationen

Moondrop BLESSING2
Bildquelle - (c) Moondrop

The BLESSING2 is a hybrid in-ear monitor from Moondrop with one dynamic driver and four balanced armature drivers in each earpiece (1DD + 4BA). It sold for about USD 320, and Moondrop's range now also includes the BLESSING3. Housings are made by 3D printing, and each pair comes with a QC certificate.

Key specs that matter

Impedance is 22 ohms at 1 kHz (±15%). Sensitivity is 117 dB/Vrms at 1 kHz. Frequency response range is 9 Hz - 37 kHz (6.35 mm free-field microphone, -3 dB), and effective frequency response is 20 Hz - 20 kHz (IEC 60318-4). THD is below 1% at 1 kHz, and the quality control range is ±1 dB at 1 kHz. Treble driver is a Knowles SWFK, mids driver a Softears D-MID-A, and bass driver a 10 mm dynamic driver with a paper diaphragm. Cable connector is 0.78 mm 2-pin.

Engineering and use context

Moondrop describes the BLESSING2 as a hybrid three-way design. Its crossover combines physical high-pass and low-pass filter structures, formed inside the shell by 3D printing, with an RC network. According to Moondrop, the aim is full-range phase consistency while the working frequency bands are allocated between the dynamic driver and the balanced armatures.

Ultra-high-precision 3D printing is used because, as Moondrop states, precision defects would otherwise cause errors in the complex internal acoustic filter structure. Housing material is imported medical resin. On the outside, the faceplate is medical-grade stainless steel, cut and engraved by CNC, with a brushed surface, and it is combined with the 3D-printed shell.

The sound nozzle has a complex internal shape that went through many experiments and modifications during development.

Included are a LITZ 4N purity oxygen-free copper earphone cable, a storage bag, an aviation adapter, three pairs of silicone ear tips (S, M, L), the QC certificate and a manual.

Pairing

A headphone output of a portable player, a phone dongle or a DAC is the source. The 0.78 mm 2-pin sockets accept replacement cables with the same connector.

Alternatives

The Moondrop BLESSING3 is the later hybrid in-ear monitor with two dynamic drivers and four balanced armatures (2DD + 4BA).

Spezifikationen

  • Modellbezeichnung

    BLESSING2

  • Wandlerprinzip

    Dynamic or Isodynamic

  • Bauart

    Closed

  • Tragestil

    In-ear

  • Untere Grenzfrequenz +/- 10dB (Hz)

    9

  • Obere Grenzfrequenz +/- 10dB (Hz)

    37 000

  • Max. Schalldruckpegel (dBSPL (1 kHz @ 5% THD))

    N/A

  • Verbindungsart

    Wired

  • Anschluss (mm)

    N/A

  • Empfindlichkeit (dBSPL (1 kHz/ 1 mW)))

    117

  • Impedanz (Ohm (1 kHz))

    22

  • Wiedergabedauer (hours)

    N/A

  • Gewicht (g)

    N/A

  • Offizieller Link