Hifiverse

Kopfhörerverstärker - Schiit Audio VALI 3

Beschreibung, Bilder, technische Daten und Spezifikationen

Schiit Audio VALI 3
Bildquelle - (c) Schiit Audio

Vali 3 is a tube hybrid headphone amplifier from Schiit Audio. It ships with a 6N3P tube as standard and also has preamp outputs for powered monitors or a speaker power amplifier. Schiit lists it at USD 149 - 159. Its chassis is made in California, the circuit boards in California or Nevada, and final assembly takes place at Schiit's facility in Corpus Christi, Texas.

Key specs that matter

Maximum power is 1,500 mW RMS per channel into 32 ohms, 1,000 mW into 50 ohms, 400 mW into 300 ohms and 200 mW into 600 ohms, rated at less than 10% THD as Schiit does for tube and tube hybrid amplifiers. Gain is 5 (14 dB) or 1 (0 dB). In low gain, frequency response is 20 Hz - 20 kHz (±0.02 dB at 300 ohms, ±0.6 dB at 32 ohms), THD is below 0.007% (20 Hz - 20 kHz, 1 V RMS, 300 ohms) and CCIR IMD is below 0.014%. Signal-to-noise ratio exceeds 117 dB (A-weighted, referenced to 2 V RMS), crosstalk is -87 dB and output impedance is 0.5 ohms. High gain raises THD to below 0.35% and output impedance to 1.8 ohms, with SNR above 105 dB. Input impedance is 50 kohms. Size is 127 x 89 x 70 mm, and weight is 0.45 kg.

Engineering and use context

Schiit calls the topology Coherence. A tube voltage gain stage is followed by a convolved bipolar current mode inverter, a discrete bipolar class A driver and a class AB output stage. The tube runs with 100 V on the plate, where Vali 2 had moved from 45 V to 60 V.

Power comes from a wall wart with 24 VAC and 6 VAC outputs. Inside are regulated high-voltage and low-voltage rails for the tube and bipolar sections and a 6 V AC heater supply, and the design is fully linear with no switching supplies. A muting relay gives delayed start and fast shut-down. Power consumption is 9 W.

Besides the 6N3P, the 5670, 2C51, 6CC42, CV4013 and WE396A can be used, and Schiit accepts any tube with a 2C51 pinout, 6 V heater and less than 600 mA of heater current. Tube life is about 5,000 hours. Replacement 6N3P tubes are sold singly by Schiit, and the 2-year limited warranty covers the tube for 90 days.

Pairing

A line-level source such as a DAC is required. The preamp outputs connect powered monitors or a power amplifier, and they mute when headphones are plugged in.

Alternatives

The Magni 6 is Schiit's fully discrete, DC-coupled current feedback headphone amplifier, rated at 3 W RMS per channel into 32 ohms.

Spezifikationen

  • Modellbezeichnung

    VALI 3

  • Maximale Leistung, 32 Ohm (mW RMS per channel)

    1500

  • Maximale Leistung, 50 Ohm (mW RMS per channel)

    1000

  • Maximale Leistung, 300 Ohm (mW RMS per channel)

    400

  • Maximale Leistung, 600 Ohm (mW RMS per channel)

    600

  • Untere Grenzfrequenz +/- 3dB (Hz)

    20

  • Obere Grenzfrequenz +/- 3dB (Hz)

    20 000

  • Verstärkung (dBu)

    1 or 5

  • Klirrfaktor (THD) (% at 1V RMS, 300 ohms)

    <0.007

  • Signal-Rausch-Abstand (dB)

    >117

  • Intermodulationsverzerrung (IMD) (%, CCIR, 300 Ohms)

    <0.014

  • Übersprechen (dB, 20Hz-20KHz, 300 Ohms)

    87

  • Ausgangsimpedanz (Ohms)

    0.5

  • Abmessungen (mm)

    127 x 89 x 70

  • Gewicht (kg)

    450

  • Offizieller Link

Weitere Komponenten