Hifiverse

Vorverstärker - Allnic Audio L-6500

Beschreibung, Bilder, technische Daten und Spezifikationen

Allnic Audio L-6500
Bildquelle - (c) Allnic Audio

The Allnic Audio L-6500 is the entry tube line preamp of Kang Su Park's South Korean company, and it took over from the earlier L-1500. Its circuit follows the same approach as the Allnic H-5500 phono stage. In the UK the L-6500 sold for GBP 6,950, and the US price was USD 7,500. Black and silver fronts are offered.

Key specs that matter

Three XLR inputs share the back panel with two RCA inputs, with one XLR and two RCA outputs. Voltage gain is 20 dB, and the maximum output reaches 15 V RMS before clipping. Input impedance is 20 kOhm on XLR and 10 kOhm on RCA, while output impedance is 150 Ohm. Response is flat from 20 Hz to 20 kHz and falls 3 dB at 16 Hz and 75 kHz. THD at 1 kHz is 0.06% at 0.3 V and 0.15% at 1.0 V, with S/N quoted as 90 dB (CCIR, 1 kHz). The chassis measures 44 x 32 x 18 cm, weighs 12 kg and draws 30 W from the mains.

Engineering and use context

The L-6500 has only one gain stage, operating in pure Class A, and each channel uses one 5842 triode for it. Allnic describes the 5842 as an equivalent of the Western Electric 417A. A 7233 triode regulates the supply for both channels, and a 5654 pentode acts as a detector that keeps this regulator in check. Instead of a cathode follower at the output, the L-6500 couples its signal through transformers, a method meant to hold output impedance low across the whole band. Allnic winds its own transformers and uses permalloy, an iron-nickel alloy, for the cores. The front panel carries a large central volume knob, a small two-way source selector, LEDs for power, operation and the chosen input, and two current meters that indicate the condition of the tubes. The supplied remote handset adjusts level and includes a mute function. There are no tone controls, no tape loop and no AV pass-through.

Pairing

The transformer-coupled output copes with lengthy cables and with solid-state power amps whose input impedance is fairly low, so owners are not tied to tube power amplification. Since the XLR and RCA outputs work in parallel, the main amp can share the signal with an active sub or with a bi-amp partner. Its gain leaves headroom for sources with a modest output level as well as for power amps that need a strong drive signal. Owners of an Allnic phono stage can connect it over XLR, and digital sources plug in through either connector type.

Alternatives

The Allnic Audio L-8500 is a higher-placed line preamplifier in the same Allnic catalogue.

Spezifikationen

  • Modellbezeichnung

    L-6500

  • Analogeingänge (symmetrisch)

    3

  • Analogeingänge (unsymmetrisch)

    2

  • Analogausgänge (symmetrisch)

    1

  • Analogausgänge (unsymmetrisch)

    2

  • Verstärkung (dBu)

    20

  • Eingangsempfindlichkeit (mV)

    N/A

  • Ausgangsspannung (V)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    10 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    150

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    150

  • Maximaler Ausgangspegel (symmetrisch) (dBu)

    N/A

  • Maximaler Ausgangspegel (unsymmetrisch) (dBu)

    N/A

  • Regelbereich der Lautstärke (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    16

  • Obere Grenzfrequenz +/- 3dB (Hz)

    75 000

  • Signal-Rausch-Abstand (SNR, unbewertet) (dB)

    90

  • Klirrfaktor + Rauschen (THD+N) (%)

    0.06 at 0.3V, 0.15 at 1.0V

  • Abmessungen (mm)

    440 x 320 x 180

  • Gewicht (kg)

    12

  • Offizieller Link