The Triton Evo Mono is a KT150 tube monoblock from Ayon Audio and the mono counterpart of the Triton Evo integrated and stereo power amplifiers. It offers true balanced or single-ended operation. Ayon redesigned all gain stages and the power stage for the shortest signal path and the most direct signal flow.
Key specs that matter
Operation is switchable between pentode and triode mode, with class A given for triode. Rated output is 120 W in pentode mode and 80 W in triode mode, with 4 and 8 ohm output taps. KT150 is the standard output tube, and KT170 is listed as an alternative. Bandwidth is 6 Hz - 70 kHz (-3 dB) and frequency response is 5 Hz - 80 kHz. Input impedance is 100 kohms at 1 kHz, input sensitivity is 750 mV for full power and S/N is 98 dB at full power. Negative feedback is 0 dB. Both RCA and XLR inputs are provided. Each unit measures 350 x 560 x 260 mm (W x D x H) and weighs 42 kg.
Engineering and use context
Two separate low-noise, insulated power transformers are encased, damped and RFI/EMI shielded. Power tubes run from a dual choke filtered supply, the pre and driver stage has its own choke, and each amplification stage has a separate, isolated supply. Filaments use regulated DC with soft start. An AC power line filter, high-capacitance energy storage and in-rush current limiting are included, and auto sequencing completes the power-on cycle in 1 minute.
There are no solid-state devices, followers or buffers in the signal path. A power tube and electronic protection circuit is installed, and bias is adjusted automatically or manually. Each output transformer has low insertion loss and multiple tightly coupled winding layers for extended bandwidth, and it is sealed with an anti-resonance compound. A ground switch selects the switchable dual grounding system with a central one-point star earth.
Ayon makes its own tube sockets with beryllium-copper spring pins, and the XLR chassis connectors come from Neutrik. Its brushed, anodised and non-magnetic aluminium chassis is hand assembled and stands on resonance-absorbing aluminium feet. A backlit logo and engraved front and rear panel legends are standard, and the finish is black or chrome.
Pairing
The XLR input accepts the output of a balanced preamplifier. Ayon lists the amplifier for more difficult loudspeaker loads.
Alternatives
The Epsilon Evo Mono is the larger EVO monoblock, with six KT150 output tubes per channel and 180 W in pentode or 100 W in triode mode.