Hifiverse

Endstufen Mono - Ayon Audio Ayon Epsilon Evo Mono

Beschreibung, Bilder, technische Daten und Spezifikationen

Ayon Audio Ayon Epsilon Evo Mono
Bildquelle - (c) Ayon Audio

The Epsilon Evo is a true balanced tube mono power amplifier from Ayon Audio and part of the company's EVO mono range with the Conquistador Evo, Vulcan Evo - Trio and Orthos Evo. Ayon calls the Evo version a totally new design compared with the earlier Epsilon. It has new operating and protection circuit boards, redesigned gain and driver stages, a revised ground system, a new choke system and an updated bias system. Each unit carries six KT150 output tubes.

Key specs that matter

Operation is switchable between pentode and triode mode, with class A given for triode. Output is rated at 180 W in pentode mode and 100 W in triode mode, with 4 and 8 ohm output taps. KT150 is the standard output tube, and KT170 is listed as an alternative. Bandwidth is 6 Hz - 70 kHz (-3 dB) and frequency response is 5 Hz - 80 kHz. Input impedance is 47 kohms at 1 kHz, input sensitivity is 900 mV and S/N is 98 dB at full power. Negative feedback is 0 dB. RCA and XLR inputs are both provided. The chassis measures 350 x 600 x 250 mm (W x D x H) and weighs 44 kg.

Engineering and use context

For the output transformer Ayon adopted a new coil technology, and according to the company the amplifier works more stably in the low-frequency range as a result. Multiple tightly coupled winding layers extend the bandwidth, and the transformers are sealed with an anti-resonance compound.

Two separate low-noise, insulated power transformers are encased, damped and RFI/EMI shielded. Power tubes run from a dual choke filtered supply, the pre and driver stage has its own choke, and every amplification stage has a separate, isolated supply. Filaments use regulated DC with soft start. An AC power line filter, high-capacitance energy storage and in-rush current limiting complete the supply, and auto sequencing finishes the power-on cycle in 1 minute.

No solid-state devices, followers or buffers are in the signal path. A power tube and electronic protection circuit is included, bias is adjusted automatically or manually and is shown on an analogue instrument, and a ground switch selects the switchable dual grounding system with a central one-point star earth. Ayon makes its own tube sockets with beryllium-copper spring pins, the XLR chassis connectors come from Neutrik and internal signal cable is a silver-copper matrix. Its brushed, anodised and non-magnetic aluminium chassis is hand assembled, stands on resonance-absorbing aluminium feet and is finished in black or chrome.

Pairing

The XLR input accepts the output of a balanced preamplifier. Ayon lists the amplifier for more difficult loudspeaker loads.

Alternatives

The Triton Evo Mono is the smaller monoblock in the same family, rated at 120 W in pentode and 80 W in triode mode.

Spezifikationen

  • Modellbezeichnung

    Ayon Epsilon Evo Mono

  • Eingangsempfindlichkeit (mV)

    900

  • Eingangsimpedanz (symmetrisch) (Ω)

    47 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    1 x 180 (Pentode), 1 x 100 (Triode)

  • Ausgangsleistung (4Ω) (W)

    1 x 180 (Pentode), 1 x 100 (Triode)

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    5

  • Obere Grenzfrequenz +/- 3dB (Hz)

    80 000

  • Signal-Rausch-Abstand (dB)

    98

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    350 x 600 x 250

  • Gewicht (kg)

    44

  • Offizieller Link