Hifiverse

Endstufen Mono - Ayon Audio Ayon Storm Mono

Beschreibung, Bilder, technische Daten und Spezifikationen

Ayon Audio Ayon Storm Mono
Bildquelle - (c) Ayon Audio

The Storm is a single-ended class A tube mono power amplifier from Ayon Audio, and the company names it its most affordable single-ended triode monoblock. It is a completely new design around the 6C33 power triode, with a new power supply, a new pre-driver stage and new output transformers. Ayon lists it in its Mono Amplifiers group, separately from the EVO mono range.

Key specs that matter

Ayon specifies a parallel single-ended (PSE) triode circuit in pure class A, with triodes in all gain stages and 6C33 output tubes. Output is 35 W, with 4 and 8 ohm output taps. Bandwidth is 10 Hz - 40 kHz and frequency response is 10 Hz - 35 kHz. Input sensitivity is 350 mV for full power, input impedance is 47 kohms at 1 kHz and S/N is 92 dB at full power. Negative feedback of any kind is 0 dB. RCA and XLR inputs are both provided. Each unit measures 345 x 560 x 250 mm (W x D x H) and weighs 40 kg.

Engineering and use context

Ayon chose the 6C33 for its high peak current delivery. Since single-ended amplifiers are more susceptible to power supply aberrations than push-pull designs, the supply uses separate power transformers, chokes and filters to isolate the input stage from the output stage. Its two low-noise, insulated toroidal power transformers are encased, damped and RFI/EMI shielded. A dual choke filters the supply for the 6C33, and the pre and driver stage has its own choke. Every amplification stage has a separate, isolated supply, separate high-current filament regulators serve the pre and driver tubes, and the remaining filaments run on regulated DC with soft start. An AC power line filter, high-capacitance energy storage and in-rush current limiting are included, and auto sequencing completes the power-on cycle in 1 minute.

No solid-state devices, followers or buffers sit in the signal path, and a power tube and electronic protection circuit is installed. Bias is static and set externally. Each output transformer has multiple tightly coupled winding layers for extended bandwidth and is sealed with an anti-resonance compound. A ground switch selects the switchable dual grounding system with a central one-point star earth. Hand assembled, the brushed, anodised and non-magnetic aluminium chassis has resonance-absorbing aluminium feet, a backlit logo, engraved panel legends and a black or chrome finish.

Pairing

A line preamplifier with RCA or XLR outputs is required, and two units are needed for stereo.

Alternatives

The Vulcan Evo - Trio Mono is the PSE triode monoblock in Ayon's EVO range, rated at 70 W with AA62B output tubes.

Spezifikationen

  • Modellbezeichnung

    Ayon Storm Mono

  • Eingangsempfindlichkeit (mV)

    350

  • Eingangsimpedanz (symmetrisch) (Ω)

    47 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    35

  • Ausgangsleistung (4Ω) (W)

    35

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    35 000

  • Signal-Rausch-Abstand (dB)

    92

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    345 x 560 x 250

  • Gewicht (kg)

    40

  • Offizieller Link