Hifiverse

Endstufen Mono - Ayon Audio Ayon Conquistador Evo Mono

Beschreibung, Bilder, technische Daten und Spezifikationen

Ayon Audio Ayon Conquistador Evo Mono
Bildquelle - (c) Ayon Audio

The Conquistador Evo Mono is a single-ended tube monoblock power amplifier from Ayon Audio, the Austrian company founded by Gerhard Hirt. Each chassis carries four AA62B-S directly heated triodes from Ayon's own tube production. Ayon builds it in limited production of five pairs per year.

Key specs that matter

Operation is pure class A with directly heated triodes (DHT), and negative feedback is 0 dB. Ayon gives no numeric output power figure. Load impedance is 4 and 8 ohms. Bandwidth is 7 Hz - 70 kHz (-3 dB), and frequency response is listed as 5 Hz - 80 kHz. Input impedance is 47 kohms, input sensitivity for full power is 500 mV, and S/N ratio is 92 dB. Both RCA and XLR inputs are provided. Each unit measures 350 x 720 x 250 mm (W x D x H) and weighs 70 kg.

Engineering and use context

According to Ayon, the signal path has no solid-state devices and no followers or buffers. Three separate low-noise, insulated toroidal power transformers sit in each chassis. The AA62B-S output tubes have their own choke-filtered power supply, and a tube-regulated power supply uses an Ayon AA5U4G. A further choke serves the pre and driver stage, and separate high-current filament regulators supply the pre and driver tubes. Every stage of amplification has its own isolated power supply.

Its output transformer is a wide-bandwidth design sealed with an anti-resonance compound. Bias is set externally as static bias, with an analogue meter scaled in mV on the chassis. An auto-sequenced soft-start brings the amplifier up in about one minute to extend tube life. Grounding is switchable between two systems, internal signal wiring is a silver-copper matrix cable, and the loudspeaker terminals are WBT binding posts. Ayon uses an aluminium chassis on resonance-absorbing aluminium feet, finished in black and chrome.

Pairing

Loudspeakers with a nominal impedance of 4 or 8 ohms are required. A preamplifier with balanced XLR or single-ended RCA outputs connects directly. The matching preamplifier is the Conquistador Evo line stage of the same series.

Alternatives

The Ayon Epsilon Evo Mono is a true balanced class A monoblock with KT150 or KT170 tubes, rated at 180 W in pentode mode and 100 W in triode mode.

Spezifikationen

  • Modellbezeichnung

    Ayon Conquistador Evo Mono

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    47 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    47 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Maximaler Strom (A)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    5

  • Obere Grenzfrequenz +/- 3dB (Hz)

    80 000

  • Signal-Rausch-Abstand (dB)

    92

  • Klirrfaktor + Rauschen (0% Gegenkopplung) (%)

    N/A

  • Klirrfaktor + Rauschen (100% Gegenkopplung) (%)

    N/A

  • Maximale Leistungsaufnahme (W)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    350 x 720 x 250

  • Gewicht (kg)

    70

  • Offizieller Link