Hifiverse

Vollverstärker - McIntosh MA8950

Beschreibung, Bilder, technische Daten und Spezifikationen

McIntosh MA8950
Bildquelle - (c) McIntosh

The MA8950 is a solid-state 2-channel integrated amplifier from McIntosh, rated at 200 W per channel and equipped with the DA2 Digital Audio Module. It replaces the MA8900. Filter capacity in the power supply has been doubled, and McIntosh states that dynamic headroom has increased from 2.0 dB to 3.1 dB as a result. Its front panel is black glass with LED lighting and blue Watt meters, on a chassis of polished stainless steel and black painted steel.

Key specs that matter

Power output is 200 W per channel into 2, 4 or 8 ohms, with a rated power band of 20 Hz - 20 kHz. Total harmonic distortion is 0.005%. Frequency response is 20 Hz - 20 kHz (+0/-0.5 dB) and 10 Hz - 100 kHz (+0/-3 dB). Damping factor is greater than 40. Signal-to-noise ratio is 95 dB at the high-level inputs, 82 dB for moving magnet and 80 dB for moving coil. Analogue inputs are 1 balanced, 6 unbalanced, 1 moving-coil phono input with adjustable loading and 1 moving-magnet phono input with fixed loading. Dimensions are 44.5 x 19.4 x 47.6 cm (W x H x D), and weight is 34.1 kg.

Engineering and use context

Autoformers are used at the output. According to McIntosh this guarantees that the speakers always receive the full 200 W whether their impedance is 2, 4 or 8 ohms.

The DA2 has seven digital inputs - 2 coaxial, 2 optical, 1 USB, 1 MCT and 1 audio-only HDMI (ARC). Conversion is by a Quad Balanced, 8-channel, 32-bit digital-to-analogue converter. Coaxial and optical inputs accept 24-bit PCM from 44.1 kHz to 192 kHz. USB accepts 32-bit PCM up to 384 kHz, DSD64 to DSD512 and DXD at 352.8 kHz and 384 kHz. Multi-channel audio formats from Dolby and DTS are supported over HDMI (ARC). The DA2 can be replaced with a newer Digital Audio Module.

Power Guard continuously monitors input and output signals and can adjust input levels dynamically, and Sentry Monitor disengages the output stage before the current can exceed safe operating levels. A discrete five-band tone control works at 30 Hz, 250 Hz, 500 Hz, 2 kHz and 10 kHz, with ±12 dB in 2 dB steps. The headphone output is a High Drive amplifier with Headphone Crossfeed Director (HXD).

Pairing

Rated power is the same into any of the three load impedances, so low-impedance loudspeakers are not a restriction. The MCT input is a secure DSD connection for McIntosh MCT series SACD/CD transports and carries DSD64 from SACD. Home Theater PassThru integrates the amplifier into a home theatre system. McIntosh lists the MA8950 as Roon Tested.

Alternatives

The MA352 is a McIntosh hybrid integrated amplifier with a vacuum tube preamplifier, analogue inputs only and no output autoformers.

Spezifikationen

  • Modellbezeichnung

    MA8950

  • Typ

    Integrated Amplifier with DAC

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    6

  • Eingangsempfindlichkeit (mV)

    1400

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    20 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    200

  • Ausgangsleistung (4Ω) (W)

    200

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    113

  • Klirrfaktor + Rauschen (%)

    0.005

  • Dämpfungsfaktor

    >40

  • Abmessungen (mm)

    445 x 194 x 476

  • Gewicht (kg)

    34.1

  • Offizieller Link

Weitere Komponenten