Hifiverse

Vollverstärker - McIntosh MAC7200

Beschreibung, Bilder, technische Daten und Spezifikationen

McIntosh MAC7200
Bildquelle - (c) McIntosh

The MAC7200 is a two-channel solid-state receiver from McIntosh Laboratory, combining a 200 W per channel power amplifier with Autoformers, a preamplifier with MM and MC phono inputs, the DA2 Digital Audio Module and an AM/FM tuner. McIntosh has made tuners since the 1950s, and the company places this tuner in the same line as the MR78 FM tuner of 1972. The MAC7200 is now listed as retired with limited availability and carries a 3-year limited warranty.

Key specs that matter

Output is 200 W per channel into 2, 4 or 8 ohms over 20 Hz - 20 kHz, with THD of 0.005%, 2 dB dynamic headroom and a damping factor above 40. Frequency response is +0/-0.5 dB from 20 Hz to 20 kHz and +0/-3 dB from 10 Hz to 100 kHz. Phono sensitivity is 0.25 mV (MC) and 2.5 mV (MM), high level 0.5 V/0.25 V (balanced/unbalanced) and power amp input 1.4 V. Signal-to-noise ratio is 80 dB (MC), 82 dB (MM), 95 dB (high level) and 113 dB (power amp input). Its 15 inputs are one balanced, five unbalanced, one MC with adjustable loading, one MM with fixed loading, two coaxial, two optical, one USB, one MCT and one audio-only HDMI ARC. FM usable sensitivity is 2.2 µV (18.1 dBf), stereo separation 38 dB and stereo S/N 68 dB. Dimensions are 445 x 194 x 476 mm (W x H x D), and weight is 34.1 kg.

Engineering and use context

Each channel drives the speaker through an output Autoformer, and McIntosh states that the full 200 W reaches the speaker regardless of its impedance. Monogrammed Heatsinks are connected to high-current output transistors that, according to the company, eliminate warm-up time. Power Guard, Sentry Monitor and Home Theater PassThru are included.

Inside the DA2 module sits an 8-channel 32-bit DAC operating in Quad Balanced mode. USB accepts PCM at 32-bit/44.1-384 kHz, DSD64 to DSD512 and DXD at 352.8 and 384 kHz, while coaxial and optical take up to 24-bit/192 kHz. Over HDMI ARC only audio from a compatible TV is played, with no video pass-through.

A signal quality monitor in the tuner displays multipath and noise levels of the incoming RF signal. RDS is supported, 20 presets are stored per band, and dedicated PRESET and TUNING knobs sit on the front. AM reception uses the supplied RAA2 remote antenna on an RJ45 connector. Two variable unbalanced outputs reach 8 V, and control connections include RS232, one main and two trigger outputs and four data ports. Its chassis is a dual-layer design in black painted steel.

Pairing

A 6.3 mm High Drive headphone output with Headphone Crossfeed Director is provided. SACD playback requires a McIntosh transport with an MCT output. The receiver is Roon Tested.

Alternatives

The McIntosh MA7200 is a two-channel integrated amplifier without the AM/FM tuner.

Spezifikationen

  • Modellbezeichnung

    MAC7200

  • Typ

    Integrated Amplifier with DAC

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    5

  • Eingangsempfindlichkeit (mV)

    500 (XLR) / 250 (RCA)

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    20 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    200

  • Ausgangsleistung (4Ω) (W)

    200

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    113

  • Klirrfaktor + Rauschen (%)

    0.005

  • Dämpfungsfaktor

    >40

  • Abmessungen (mm)

    445 x 194 x 476

  • Gewicht (kg)

    34.1

  • Offizieller Link

Weitere Komponenten