Hifiverse

Vollverstärker - McIntosh MA352

Beschreibung, Bilder, technische Daten und Spezifikationen

McIntosh MA352
Bildquelle - (c) McIntosh

The MA352 is a 2-channel hybrid integrated amplifier from McIntosh, with a vacuum tube preamplifier and a direct-coupled solid-state power amplifier in one chassis. All inputs are analogue. McIntosh builds it on a stainless steel chassis polished to a mirror finish, with a black glass front panel that has direct LED backlighting, dual-scale blue Watt meters and vintage McIntosh-styled die-cast aluminium name badges.

Key specs that matter

Power output is 200 W per channel into 8 ohms and 320 W per channel into 4 ohms, with a rated power band of 20 Hz - 20 kHz. Total harmonic distortion is 0.03% and dynamic headroom is 1.5 dB. Frequency response is 20 Hz - 20 kHz (±0.5 dB) and 10 Hz - 100 kHz (-3 dB). Damping factor is greater than 200 at 8 ohms and greater than 100 at 4 ohms. The preamplifier uses a pair of 12AX7A and a pair of 12AT7 tubes. Inputs are 2 balanced, 3 unbalanced and 1 moving-magnet phono input with adjustable loading. High-level sensitivity is 0.5 V balanced and 0.25 V unbalanced, phono sensitivity is 2.5 mV, and signal-to-noise ratio is 93 dB for both. Dimensions are 44.5 x 25.1 x 44.3 cm (W x H x D), and weight is 29.9 kg.

Engineering and use context

McIntosh equips the output stage with two protection circuits. Power Guard monitors the output signal for overdriving. Its second circuit, Sentry Monitor, is fuse-less short-circuit protection that disengages the output stage before current exceeds safe operating levels. The high-current output transistors are mounted on McIntosh Monogrammed Heatsinks, which the company says reduce warm-up time.

A 5-band analogue tone control is included, each band adjustable by ±12 dB, and it can be bypassed or assigned to individual inputs. For headphones there is a 1/4-inch High Drive headphone amplifier with Headphone Crossfeed Director (HXD). Loudspeakers connect to gold-plated speaker binding posts.

Pairing

No output autoformers are used, so rated power depends on the impedance of the loudspeakers and is higher into 4 ohms. The stereo preamplifier output is variable and can drive a higher-powered amplifier or 1 or 2 powered subwoofers. Home Theater Pass Through integrates the MA352 into a home theatre system with an A/V processor. Power Control sends power on/off signals to connected McIntosh components, and the Data Ports send remote control commands to connected source components. A turntable with a moving-magnet cartridge connects directly to the phono input.

Alternatives

The MA252 is the smaller McIntosh hybrid integrated amplifier, rated at 100 W per channel into 8 ohms with 4 analogue inputs.

Spezifikationen

  • Modellbezeichnung

    MA352

  • Typ

    Integrated Amplifier with DAC

  • Analogeingänge (symmetrisch)

    2

  • Analogeingänge (unsymmetrisch)

    3

  • Eingangsempfindlichkeit (mV)

    2500

  • Eingangsimpedanz (symmetrisch) (Ω)

    20 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    20 000

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    Ja

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    200

  • Ausgangsleistung (4Ω) (W)

    320

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    100 000

  • Signal-Rausch-Abstand (dB)

    93

  • Klirrfaktor + Rauschen (%)

    0.03

  • Dämpfungsfaktor

    >200

  • Abmessungen (mm)

    445 x 251 x 443

  • Gewicht (kg)

    29.9

  • Offizieller Link

Weitere Komponenten