The MA5300 is a two-channel solid-state integrated amplifier from McIntosh Laboratory and, according to the company, its smallest solid-state integrated in both power output and physical size. It combines a direct-coupled power amplifier, a preamplifier with moving magnet phono input and the DA1 Digital Audio Module in one chassis. McIntosh now lists it as retired with limited availability, covered by a 3-year limited warranty.
Key specs that matter
Power output is 100 W per channel into 8 ohms and 160 W into 4 ohms, with a rated power band of 20 Hz - 20 kHz. THD is 0.005% and dynamic headroom is 1.8 dB. Frequency response is +0/-0.5 dB from 20 Hz to 20 kHz and +0/-3 dB from 10 Hz to 100 kHz. Damping factor is above 200 at 8 ohms and above 100 at 4 ohms. Sensitivity is 2.5 mV (MM phono), 0.5 V/0.25 V (high level, balanced/unbalanced) and 1 V (power amp input), and input impedance is 20 kohms. Signal-to-noise ratio is 82 dB (phono), 95 dB (high level) and 110 dB (power amp input). Of its 12 inputs, six are analogue (one balanced, four unbalanced, one MM phono with fixed loading) and six digital (two coaxial, two optical, one USB, one MCT). Dimensions are 444.5 x 152 x 476 mm (W x H x D), and weight is 17.2 kg.
Engineering and use context
Every digital input is housed in the DA1 module, which McIntosh designed to be replaced by future modules, and an optional upgrade to the DA2 is available. Its 8-channel 32-bit/384 kHz PCM/DSD DAC is used in Quad Balanced mode. Coaxial and optical inputs accept 24-bit at 44.1 kHz to 192 kHz, while USB takes 32-bit PCM up to 384 kHz, DSD64 to DSD256 and DXD at 352.8 and 384 kHz. The MCT input carries 16-bit/44.1 kHz CD and DSD64 SACD data from a McIntosh MCT series transport.
Monogrammed Heatsinks are connected to high-current output transistors, and McIntosh says these eliminate warm-up time. Power Guard and Sentry Monitor are included, together with Home Theater PassThru, bass and treble controls with tone bypass, input level match and gold-plated binding posts. Dual-scale blue watt meters read power for both 4 and 8 ohm loads. Inside a dual-layer chassis of black painted steel, the US version draws 2.3 A at 120 V. Control connections include RS232, a main power control output, two data ports and an IR sensor input.
Pairing
A 6.3 mm High Drive headphone output with Headphone Crossfeed Director is on the front panel. The variable unbalanced output reaches 8 V maximum. A phono stage or step-up transformer is required for an MC cartridge. The amplifier is Roon Tested.
Alternatives
The McIntosh MSA5500 is a two-channel streaming integrated amplifier.