Hifiverse

Vollverstärker - Line Magnetic Audio AS-128 212

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio AS-128 212
Bildquelle - (c) Line Magnetic Audio

The AS-128 212 is a class A mono integrated amplifier in the Analog Series of Line Magnetic, produced by LM Audio Foshan. Line Magnetic was founded in 2005 by two brothers who started by restoring and copying Western Electric, Altec and Jensen equipment. Each chassis drives one channel with a single 212 transmitting triode in a single-ended output stage. Every unit carries its own preamplifier stage rather than a passive volume control.

Key specs that matter

Power output is 30 W (RMS), with output taps for 4, 8 and 16 ohms. Sensitivity is 500 mV, input impedance is 100 kohms or 600 ohms, and gain is 40 or 52 dB. Frequency response is 10 Hz - 45 kHz (±2 dB), S/N is 88 dB and THD is 1%. Per chassis the tube complement is two 12AX7, one 6L6, one 212 and two 5U4 rectifiers. Each unit measures 490 x 400 x 600 mm and weighs 70 kg. Mains supply is 220 V ±5% at 50 Hz, with a current draw of 1.4 A.

Engineering and use context

Wiring inside is done by hand, point to point. A replica of the Western Electric 618 input transformer sits at the preamplifier stage, and the 6L6 is placed between the 12AX7 stage and the 212. Separate transformers supply the high and low voltages, and each chassis has two mains inlets, a black one for the high-voltage side and a grey one for the low-voltage side.

On the front panel there are a mode switch for integrated or power amplifier operation, an ammeter, a volume knob, an input selector and the power switch. Two side switches control the lighting and the status indicator. Inputs are one balanced and four RCA. A remote control, two spare fuses and a detachable mains cord come with each unit.

Pairing

Two units are needed for stereo. Loudspeakers with high sensitivity are required. The highest output tap allows high-impedance loudspeakers, and in power amplifier mode an external preamplifier is connected.

Alternatives

The AS-125PP 211 is a Line Magnetic class AB mono integrated amplifier with two push-pull 211 output tubes per chassis and 60 W RMS.

Spezifikationen

  • Modellbezeichnung

    AS-128 212

  • Typ

    Tube Mono Integrated Amplifier

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    4

  • Eingangsempfindlichkeit (mV)

    500

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    600

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    30

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    40 / 52

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    45 000

  • Signal-Rausch-Abstand (dB)

    88

  • Klirrfaktor + Rauschen (%)

    1

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    490 x 400 x 600

  • Gewicht (kg)

    70

  • Offizieller Link