Hifiverse

Vollverstärker - Line Magnetic Audio AS-125N

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio AS-125N
Bildquelle - (c) Line Magnetic Audio

The AS-125N is a stereo tube integrated amplifier from the Analog Series of Line Magnetic, produced by LM Audio Foshan. On the maker's own site it appears simply as the AS-125 Integrated Amplifier (211 Single Ended). An export-only version, the AS-325N, uses upgraded components on the same basis. Line Magnetic pairs transformer technology taken from Western Electric with a set of practical user features.

Key specs that matter

Output power is 18 W RMS per channel. Frequency response is 10 Hz - 45 kHz (±2 dB), signal-to-noise ratio is 88 dB and THD is 1%. Input sensitivity is 500 mV, input impedance is 100 kohms or 600 ohms, and gain is switchable between 40 and 52 dB. Four pairs of RCA inputs are provided, with 4, 8 and 16 ohm output taps. It measures 480 x 275 x 490 mm and weighs 50 kg, or about 70 kg in its shipping crate.

Engineering and use context

Each channel has one directly heated 211 triode in a single-ended class A output stage. Ahead of the two 211s sit three 12AX7 and two 6SN7 small-signal tubes. Line Magnetic uses two power transformers, one for the high-voltage supply and one for the low-voltage supply.

At the input of the built-in preamplifier stage there is a Line Magnetic copy of the Western Electric 618 transformer. Assembly is manual throughout, and the components are joined by individual point-to-point leads instead of a circuit board.

Its finish is grey. Units supplied to the Australian market are set for 240 V mains.

Pairing

Loudspeakers with high sensitivity are required. Line Magnetic's own LM-812 horn system is a matching speaker from the same maker. The highest output tap allows connection of high-impedance loudspeakers, and the four line inputs accept several sources without a separate preamplifier.

Alternatives

The LM-805IA is a Line Magnetic stereo integrated amplifier with single-ended 805 output tubes and 48 W per channel.

Spezifikationen

  • Modellbezeichnung

    AS-125N

  • Typ

    N/A

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    N/A

  • Eingangsempfindlichkeit (mV)

    500

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    100 000 / 600

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    18 + 18

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    40 / 52

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    45 000

  • Signal-Rausch-Abstand (dB)

    88

  • Klirrfaktor + Rauschen (%)

    1

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 x 275 x 490

  • Gewicht (kg)

    50

  • Offizieller Link