Hifiverse

Vollverstärker - Line Magnetic Audio AS-125PP 211

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio AS-125PP 211
Bildquelle - (c) Line Magnetic Audio

The AS-125PP 211 is a mono tube integrated amplifier in the Analog Series of Line Magnetic, produced by LM Audio Foshan. Line Magnetic classifies it as a class AB monoblock. Its output stage is push-pull, with two 211 triodes per chassis, while the stereo AS-125 has one single-ended 211 per channel. Each monoblock carries a full preamplifier stage.

Key specs that matter

Power output is 60 W + 60 W (RMS) for the pair, or 60 W per monoblock. Frequency response is 10 Hz - 70 kHz (±2 dB). S/N is 88 dB and THD is 1%. Sensitivity is 500 mV or 14 mV, input impedance is 100 kohms or 600 ohms, and gain is 51 or 63 dB. Output taps are provided for 4, 8 and 16 ohms. Each chassis measures 480 x 275 x 490 mm and weighs 43 kg. Mains supply is 220 V ±5% at 50 Hz, with a current draw of 1.4 A.

Engineering and use context

Per monoblock the tube complement is one 12AX7, two 12AU7, two 6V6 (6P6P) and two 211. A Line Magnetic replica of the Western Electric 618 transformer sits at the input of the preamplifier stage. All parts are joined by hand-laid point-to-point wiring instead of traces on a board.

Separate power inputs supply the high-voltage and low-voltage stages. On the front panel there is a VU meter that can be switched off. A front switch sets each unit to power amplifier mode, bypassing the internal volume stage. Four pairs of RCA inputs are provided on every chassis.

Chassis dimensions match those of the stereo AS-125. A crated pair weighs about 70 kg, and units for Australia are set for 240 V mains.

Pairing

Two units are needed for stereo. Loudspeakers with a power rating at or above the amplifier output are required. In power amplifier mode an external preamplifier is connected, and the higher-gain setting accepts sources with a low output level.

Alternatives

The AS-128 212 is a Line Magnetic class A mono integrated amplifier with one 212 output triode per chassis and 30 W RMS.

Spezifikationen

  • Modellbezeichnung

    AS-125PP 211

  • Typ

    Tube Mono Integrated Amplifier

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    4

  • Eingangsempfindlichkeit (mV)

    500 / 14

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    600

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    60 + 60

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    51 / 63

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    88

  • Klirrfaktor + Rauschen (%)

    1

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 x 275 x 490

  • Gewicht (kg)

    43

  • Offizieller Link