Hifiverse

Vollverstärker - Line Magnetic Audio LM-126

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio LM-126
Bildquelle - (c) Line Magnetic Audio

The LM-126 is a stereo tube integrated amplifier that Line Magnetic released for its tenth anniversary, listed in the Analog Series of LM Audio Foshan. Founded in 2005 by two brothers, the company started out repairing and replicating Western Electric, Altec and Jensen equipment. For this model it took a Western Electric amplifier circuit as the blueprint. In place of the 6L6 output tubes of that original concept, it uses the KT66 to raise output.

Key specs that matter

Power output is 15 W + 15 W (RMS), with output taps for 4, 8 and 16 ohms. Sensitivity is 500 mV, input impedance is 100 kohms or 600 ohms, and gain is 40 or 52 dB. Frequency response is 10 Hz - 45 kHz (±2 dB), S/N is 88 dB and THD is 1%. Four KT66 tubes form the output stage, and 5U4 tubes are used as rectifiers. It measures 480 x 300 x 530 mm and weighs 42 kg. Current draw is 0.8 A at 220 V, and versions for 110 V and 220 V mains (±5%, 50 Hz) are listed.

Engineering and use context

At the front of the circuit sits a copy of the Western Electric 618 input transformer, the same transformer type Line Magnetic uses in its Analog Series monoblocks. High and low voltages are rectified separately, and each supply is filtered by its own choke coil.

Line Magnetic classifies the LM-126 as an integrated power amplifier. It accepts a signal either through its own volume stage or from a separate preamplifier when used as a power amplifier. Wiring inside is done by hand, point to point, as in the brand's other tube electronics.

Pairing

Loudspeakers with high sensitivity are required. The highest output tap allows high-impedance loudspeakers. A higher gain setting is provided for sources with a low output level.

Alternatives

The LM-216IA is a Line Magnetic stereo integrated amplifier with push-pull KT88 output tubes and 38 W per channel.

Spezifikationen

  • Modellbezeichnung

    LM-126

  • Typ

    Integrated Amplifier

  • Analogeingänge (symmetrisch)

    1

  • Analogeingänge (unsymmetrisch)

    1

  • Eingangsempfindlichkeit (mV)

    500

  • Eingangsimpedanz (symmetrisch) (Ω)

    100 000

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    600

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    40 / 52

  • Untere Grenzfrequenz +/- 3dB (Hz)

    10

  • Obere Grenzfrequenz +/- 3dB (Hz)

    45 000

  • Signal-Rausch-Abstand (dB)

    88

  • Klirrfaktor + Rauschen (%)

    1

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    480 x 300 x 530

  • Gewicht (kg)

    42

  • Offizieller Link