Hifiverse

Vollverstärker - Line Magnetic Audio AS-125

Beschreibung, Bilder, technische Daten und Spezifikationen

Line Magnetic Audio AS-125
Bildquelle - (c) Line Magnetic Audio

The AS-125 is a single-ended tube integrated amplifier from the Analog Sound series of Line Magnetic Audio in Zhuhai, China. Line Magnetic describes it as a straight hot 211 design in class A, with one directly heated 211 triode per channel. Its maker credits the late Zheng Cai, who studied classic Western Electric designs, with the work that brought the 211 into its modern amplifiers. A monoblock sibling, the AS-125PP, is sold as a pair. Prices start at AUD 13,200.

Key specs that matter

Output power is 18 W RMS per channel. Tube complement is three 12AX7 at the input, two 6SN7 double triodes as drivers and two 211 output tubes. Four pairs of RCA inputs are provided, and the output transformers have 4, 8 and 16 ohm taps. Gain is switchable between 40 and 52 dB, input sensitivity is 500 mV and input impedance is 100 kohms or 600 ohms. Frequency response is 10 Hz - 45 kHz (±2 dB), signal-to-noise ratio is 88 dB and THD is 1%. The case measures 480 x 275 x 490 mm (W x H x D). Net weight is 110 lb (about 50 kg), and the crated weight is about 70 kg.

Engineering and use context

Two power transformers are used, one for the high-voltage supply and one for the low-voltage supply. Each has its own mains inlet on the rear panel. The output tubes are auto-biased. Instead of a passive volume control ahead of the output stage, the AS-125 has a full preamplifier stage, and its input passes through a replica of the Western Electric 618 input transformer.

A front-panel switch sets the unit to work as an integrated amplifier or as a power amplifier driven by an external preamplifier. The front meter can be switched off. All connections inside are hand-soldered point to point. Line Magnetic lists the 12AX7EH, ECC83, ECC803 and 5751 as alternatives for the input tubes, and the 6H8C, 6F8G, CV181 or ECC32 for the driver positions. Finish is grey.

Pairing

High-sensitivity loudspeakers such as horn systems or large full-range drivers are required. The 4, 8 and 16 ohm taps allow the output transformer to match the nominal impedance of the speaker. In power amplifier mode an external preamplifier is required.

Alternatives

The LM-845IA is Line Magnetic's single-ended integrated amplifier with one 845 per channel and 22 W per channel.

Spezifikationen

  • Modellbezeichnung

    AS-125

  • Typ

    Tube Integrated Amplifier

  • Analogeingänge (symmetrisch)

    N/A

  • Analogeingänge (unsymmetrisch)

    4

  • Eingangsempfindlichkeit (mV)

    N/A

  • Eingangsimpedanz (symmetrisch) (Ω)

    N/A

  • Eingangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (symmetrisch) (Ω)

    N/A

  • Ausgangsimpedanz (unsymmetrisch) (Ω)

    N/A

  • D/A-Wandlung

    k. A.

  • Phono MM/MC-Eingangsimpedanz (stromgekoppelt) (Ω)

    N/A

  • Ausgangsleistung (8Ω) (W)

    N/A

  • Ausgangsleistung (4Ω) (W)

    N/A

  • Verstärkung (dBu)

    N/A

  • Untere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Obere Grenzfrequenz +/- 3dB (Hz)

    N/A

  • Signal-Rausch-Abstand (dB)

    N/A

  • Klirrfaktor + Rauschen (%)

    N/A

  • Dämpfungsfaktor

    N/A

  • Abmessungen (mm)

    N/A

  • Gewicht (kg)

    50

  • Offizieller Link