The LM-300IA is a 300B single-ended integrated amplifier from Line Magnetic, a Chinese company founded in 2005 by two brothers. They began by repairing historic Western Electric, Altec and Jensen equipment and building replicas of it. Line Magnetic offers integrated amplifiers with 300B, 805, 212, KT88, KT170 and EL84 output tubes. Retail price is just under USD 4,000, and an LM-300IA Plus version is sold separately.
Key specs that matter
Output is 10 W per channel in class A from one directly heated PSVANE 300B triode per channel. Tung-Sol 6SL7GT and 12AT7 (ECC81) tubes make up the front end, and two LINLAI 274B rectifier tubes supply the high voltage. Frequency response is 20 Hz - 50 kHz (±1.5 dB). Signal-to-noise ratio is 87 dB, input sensitivity is 200 mV and input impedance is 100 kohms. Inputs are three pairs of RCA line inputs and a Pre-In, which sets the unit to power amplifier mode. A subwoofer output and speaker terminals with 4, 8 and 16 ohm taps are on the rear panel. Dimensions are 435 x 217 x 365 mm, and weight is 34 kg.
Engineering and use context
It is a single-ended design with one output tube per channel, operating in class A at all times. Two wide-band EI output transformers of Line Magnetic's own design are used, toroidal transformers are used in the power supply, and each transformer is encapsulated against interference. Tube rectification with the 274B gives a gradual rise of the high voltage at switch-on, and a soft-start circuit with a 30-second delay also protects the tubes.
Bias is adjusted manually. A built-in current meter on the top plate shows the idle current of each 300B. Volume is set by an ALPS potentiometer, and an IR remote control is supplied. Assembly is by hand with point-to-point wiring instead of a printed circuit board. Its cabinet has a piano lacquer finish, and a removable metal cage covers the tubes.
Pairing
High-sensitivity loudspeakers are required, such as horns, full-range drivers or efficient two-way designs. The output tap is selected to match the nominal impedance of the speaker. An active subwoofer connects to the subwoofer output. Through the Pre-In, an external preamplifier or the front outputs of an AV processor can be connected.
Alternatives
The Line Magnetic LM-805IA is a single-ended integrated amplifier with 805 output tubes and 48 W per channel.