Напольная акустика — Sonus Faber Il Cremonese Ex3me Automobili Lamborghini Edition

The Il Cremonese Ex3me Automobili Lamborghini Edition is a floorstanding loudspeaker produced by the Italian company Sonus Faber in collaboration with the carmaker Automobili Lamborghini. The starting point is the Il Cremonese Ex3me, and the edition is limited to 50 individually numbered pairs worldwide. The announced price is EUR 125,000 or USD 130,000 per pair, and production is strictly made to order, so delivery takes three months or more.

Key specs that matter

A 3.5-way driver layout is used, loaded by a full para-aperiodic vented box. At the top sits a 30 mm Diamond Like Carbon beryllium dome tweeter, below it a 180 mm M18 XTR-04 midrange with a neodymium magnet system, then two 180 mm W18XTR-12 woofers. Two 220 mm long-throw infrawoofers whose cones combine nanocarbon fibre with a Nomex honeycomb core are mounted on the cabinet sides. Crossover points fall at 80, 250 and 2,500 Hz. Sonus Faber quotes a range of 25 Hz to 35,000 Hz, a sensitivity of 92 dB SPL at 2.83 V and 1 m, and a nominal impedance of 4 ohm. Each speaker measures 1449 x 398 x 621 mm and weighs 84 kg.

Engineering and use context

In plan the cabinet forms a five-sided rhomboid, and the top is left open so that the internal crossover network stays visible. That crossover was reworked using the Paracross Topology of Sonus Faber with Mundorf components, aimed at phase precision and a lower noise floor. The Lamborghini treatment uses twill carbon fibre together with Corsatex upholstery by Dinamica, and a Lamborghini Shield emblem is fixed to the front panel. Buyers choose between five colours taken from the car range - Giallo Countach, Arancio Egon, Blu Marinus Matte, Verde Mercurius and Nero Nemesis Matte - and an online configurator shows each combination before an order is placed. The side-firing infrawoofers handle only the band below 80 Hz, leaving the front-facing woofers to cover the region up to the 250 Hz handover to the midrange.

Pairing

The maker recommends amplifiers delivering from 100 W to 800 W of undistorted signal. With the low nominal load, high-current transistor designs, whether one stereo chassis or two monoblocks, make a logical match, and the high sensitivity rating lets amplifiers near the bottom of that window drive it adequately.

Alternatives

The standard Sonus Faber Il Cremonese is the earlier floorstander with the same 3.5-way layout and a 28 mm DAD Arrow Point soft dome tweeter.