Hifiverse

Tonearms - Thomas Schick Thomas Schick 12”

Description, images, technical data and specifications

Thomas Schick Thomas Schick 12”
Image source - (c) Thomas Schick

The Schick 12 is the 12-inch tonearm of Thomas Schick, a German designer who makes his arms completely by hand in Germany. Schick calls it the classic, long Schick tonearm. He started his own development after finding considerable defects in old tonearms. He names the old 12-inch arms of Ortofon and SME, many of which are in very bad condition after 40 years of use. The arm is offered in an SME version and an SPU-G version.

Key specs that matter

This 12-inch tonearm uses ball bearings with 0 µm positive and 7 µm negative tolerance. Its arm tube is damped with three different materials in nine sections. Schick specifies it for cartridges from about 6 g with a compliance below 20 µm/mN, excluding only lightweight and very soft MM cartridges. A lift, an arm bench, an anti-skating mechanism and two counterweights, regular and heavyweight, are included. Standard wiring is a 1.1 m symmetrical cable with Neutrik RCA plugs, with fixed lowest resistance and capacitance. A 5-pin tonearm connector made by Schick, with Teflon insulation and electronic test pins, or a captive cable are the options. Finishes are gold-plated shiny, black chrome matt and nickel palladium matt.

Engineering and use context

Schick points out that in many older arms steel balls are simply placed between the tonearm parts, and that knife and single point bearings have play. In the Schick arm the ball bearings have stable axis guidance. With the close tolerance, polished raceways and balls and a synthetic lubricant, the bearing is practically free of play, with low running noise and a low breakaway torque. These bearings are specified for very high speeds, and Schick expects a life of several decades.

To reduce resonance, Schick connects metal parts mechanically, including the headshell construction, the contact area between the arm and the headshell plug, the axis through the arm and the counterweight.

No headshell is included. Schick recommends his own damped graphite or wood headshell.

Pairing

A turntable with a 12-inch armboard is required. The SPU-G version is intended for SPU-G pickups, and the SME version needs a separate headshell.

Alternatives

The Schick 9 is the shorter 9.6-inch version of the same arm, and it is a drop-in replacement for EMT turntables.

Specifications

Related content