Hifiverse

Tonearms - Scheu Analog SCHEU TACCO MKII 9"

Description, images, technical data and specifications

Scheu Analog SCHEU TACCO MKII 9"
Image source - (c) Scheu Analog

The Tacco MKII is a unipivot tonearm from Scheu Analog of Solingen, Germany, and the top model of the three Scheu tonearms. Thomas Scheu, a toolmaker and musician, founded the company in 1985, and since his death in December 2004 it has been run by his wife Ulla. The arm tube is made of wood, and the MKII is offered in a single arm length. Its German price is EUR 3,737.50.

Key specs that matter

Effective length is 238 mm, with a mounting distance of 222 mm and an overhang of 16 mm. Effective mass is 14 - 16 g. The conical wooden arm tube is available in thuja or amboina. Scheu specifies an aluminium headshell and adjustable lateral balance. The standard tonearm cable length is 1.15 m from the arm base, and other lengths are available on request.

Engineering and use context

According to Scheu, the development took all known geometric parameters into account and concentrated on the choice of materials. Bearing and counterweight form a single block of tungsten. Its high density keeps the unit compact, concentrates the free masses in a small space and suppresses resonances inside the bearing unit. For the same reason the Tacco needs only a very small counterweight.

Each MKII uses a new ruby and sapphire bearing. A 2 mm ruby ball on a hard-metal pin forms the bearing tip, and the bearing cup is made of leuco-sapphire and worked into the tungsten base of the arm. Scheu states that this arrangement has very low internal friction and a well-defined contact area, so the pivot point cannot shift.

Scheu developed its tonearm cable together with the cable specialist Audictive for its unipivot arms. Each conductor is a bundle of 42 silver-plated copper-alloy strands of 0.025 mm, with a total cross-section of 0.021 mm2, about 1 ohm per metre and FEP insulation. Two conductors per channel are twisted together. From the arm base they run in a Teflon tube under a braid of tinned copper, and this shield is connected to the phono stage chassis by the ground lead. Scheu advises against cable runs longer than 1.5 m.

Pairing

An armboard cut for the specified mounting distance is required. The phono stage needs a chassis ground terminal for the ground lead.

Alternatives

The Scheu Classic MKII is a lower-priced unipivot tonearm with a folded aluminium U-section arm, 245 mm effective length and 11 g effective mass.

Specifications

  • Model name

    SCHEU TACCO MKII 9"

  • Type

    Unipivot

  • Effective mass (g)

    14 to 16 gr

  • Effective length (mm)

    238

  • Cartridge Balance range (g)

    N/A

  • Offset angle (deg)

    N/A

  • Overhang (mm)

    16

  • Weight (g)

    N/A

  • Official link

Related content